Hydrometer question - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Hydrometer question

Reply
 
Thread Tools
Old 10-03-2011, 05:01 PM   #1
STAD
Recipes 
 
Sep 2008
San Jose, California
Posts: 633
Liked 2 Times on 2 Posts



Hey guys,

I just brewed my first batch in about 2 years and I have admittedly gone back to the noob stage. I brewed Ed Wort's Haus Pale Ale, and it was my first time using my new turkey fryer.

Previously, I had never really used the hydrometer, but instead just waited extra time before bottling/kegging. This time around, I wanted to things right. However, when the boil was done, and after I realized I had far too many non-homebrews to be competent in anything, I noticed that the hydrometer reading was 1.07 instead of the suggested 1.051. I also didn't take not of the temperature, but if I had to guess, I would say that it was hotter than the 60 degrees F that my hydro is rated. This would mean that the OG was actually even higher, correct? After pouring into my 6.5 glass, I realized that I most likely lost a lot of water during the boil (which would explain the higher OG, right?)

Today (10 days later) I took a sample and got a FG of 1.018ish (still not good at this). Is there any correlation between high OG and high FG?


__________________
Primary: EdWort's Haus Pale Ale
Bottled:
Kegged:
Up next: Peanut Butter Porter

 
Reply With Quote
Old 10-03-2011, 05:06 PM   #2
akimbo78
HBT_LIFETIMESUPPORTER.png
 
akimbo78's Avatar
Recipes 
 
Sep 2011
Perkasie, PA
Posts: 254
Liked 2 Times on 2 Posts


so you didn't top off to ferment 5 gallons? at 1.07 standard yeast may have trouble without a starter or double pitching.



 
Reply With Quote
Old 10-03-2011, 05:09 PM   #3
h22lude
HBT_SUPPORTER.png
 
h22lude's Avatar
Recipes 
 
Dec 2010
lincoln, ri
Posts: 2,529
Liked 144 Times on 121 Posts


Boil off will create a higher OG so if you had a lot of evaporation your OG will be higher than expected which will mean your FG will be higher too.

Not taking the reading around 65* will also effect the reading
__________________
Primary: Galaxy Dry Hopped Fort Point clone

Kegged: Saison

Bottled: S'mores Stout

 
Reply With Quote
Old 10-03-2011, 05:10 PM   #4
STAD
Recipes 
 
Sep 2008
San Jose, California
Posts: 633
Liked 2 Times on 2 Posts


Quote:
Originally Posted by akimbo78 View Post
so you didn't top off to ferment 5 gallons? at 1.07 standard yeast may have trouble without a starter or double pitching.
I did not top off to 5 gallons, but I'm also not absolutely positive it's significantly less. Also, the integrity of my OG measurement may be off as well. I'm just looking for advice on how to proceed. Should I just see if the FG changes tomorrow, and if not, bottle it?
__________________
Primary: EdWort's Haus Pale Ale
Bottled:
Kegged:
Up next: Peanut Butter Porter

 
Reply With Quote
Old 10-03-2011, 05:12 PM   #5
akimbo78
HBT_LIFETIMESUPPORTER.png
 
akimbo78's Avatar
Recipes 
 
Sep 2011
Perkasie, PA
Posts: 254
Liked 2 Times on 2 Posts


i would give it 3 days and see if it is still the same, but then again i am a noob and will err on the side of caution.

 
Reply With Quote
Old 10-03-2011, 05:15 PM   #6
STAD
Recipes 
 
Sep 2008
San Jose, California
Posts: 633
Liked 2 Times on 2 Posts


Quote:
Originally Posted by h22lude View Post

Not taking the reading around 65* will also effect the reading
My hydrometer is supposed to be at 60*F so that would affect it even more so correct?

Am I right in assuming that if I take a reading at a higher temp, then the true OG should be higher than what I'm reading?
__________________
Primary: EdWort's Haus Pale Ale
Bottled:
Kegged:
Up next: Peanut Butter Porter

 
Reply With Quote
Old 10-03-2011, 05:16 PM   #7
TopherM
Recipes 
 
Mar 2011
St. Petersburg, FL
Posts: 3,975
Liked 447 Times on 353 Posts


The good news is you are going to make beer either way. Don't worry about correcting this batch, just learn this lesson for the next batch:

When calculating your total water volume, you have to account for grain absorbtion, biol off, evaperation during cool down, and trub loss in the fermenter. Everyone's equipment, and each batch is different, so you really have to figure out these numbers on your equipment.
__________________
Primary #1 - Midnight Ryeder (Midnight Wheat and Rye)
Primary #2 - Florida Weiss
Primary #3 - Kane-DOH APA (Honey Citra APA)
Secondary #1 - Downtown Flanders Brown (brewed August 2012)
Keg #1 - Raspberry Florida Weiss
Keg #2 - Cinnamon Raisin Cider
Keg #3 - NONE!
Bottled - NONE!

 
Reply With Quote
Old 10-03-2011, 05:18 PM   #8
STAD
Recipes 
 
Sep 2008
San Jose, California
Posts: 633
Liked 2 Times on 2 Posts


I understand that. I have never tasted the beer before it's completion, so today worried me a bit. The sample was really sweet tasting and not very hoppy like a pale ale should be.
__________________
Primary: EdWort's Haus Pale Ale
Bottled:
Kegged:
Up next: Peanut Butter Porter

 
Reply With Quote
Old 10-03-2011, 09:27 PM   #9
h22lude
HBT_SUPPORTER.png
 
h22lude's Avatar
Recipes 
 
Dec 2010
lincoln, ri
Posts: 2,529
Liked 144 Times on 121 Posts


Quote:
Originally Posted by STAD

My hydrometer is supposed to be at 60*F so that would affect it even more so correct?

Am I right in assuming that if I take a reading at a higher temp, then the true OG should be higher than what I'm reading?
The reading should be taken around 60 yes. Once you get to 70 you will need to add 1 point. The higher the temp the more points you will need to add.
__________________
Primary: Galaxy Dry Hopped Fort Point clone

Kegged: Saison

Bottled: S'mores Stout

 
Reply With Quote
Old 10-03-2011, 11:36 PM   #10
iaefebs
Registered User
Recipes 
 
Aug 2010
West Coast, MI
Posts: 2,674
Liked 245 Times on 177 Posts


If you started at 1.070 and are at 1.018 you had a 75% attenuation. Depending on the yeast you used you are probably close to being done. That same yeast if it started at 1.051 would get you to 1.013 @ 75% attenuation. And a quart or so more boil off could make a big difference in SG. Welcome back to the home brew world.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydrometer question Signal1hundred Beginners Beer Brewing Forum 12 03-03-2010 09:58 PM
Hydrometer question dockmasterjc Beginners Beer Brewing Forum 1 10-20-2009 08:59 PM
Question about the hydrometer ElPresidente77 Beginners Beer Brewing Forum 7 01-29-2009 03:18 PM
hydrometer question m.keller Beginners Beer Brewing Forum 23 05-19-2006 02:43 PM
Hydrometer question & others Dead Weasel Beginners Beer Brewing Forum 9 02-06-2006 02:57 PM


Forum Jump