Fermentation head space? How much? - Home Brew Forums
Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Cider Forum > Fermentation head space? How much?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 10-02-2011, 08:49 PM   #1
alwhite77
Recipes 
 
Oct 2011
silt, co
Posts: 10


I've started my very first batch of cider, in a 3 gallon carboy. I have a commercial stopper and airlock, and two questions.

1 - how much headspace is required for primary fermentation in a glass carboy? I left just a few inches.

2 - when installing the airlock, how much water are you supposed to add to the airlock? does it have to be sanitary water/vodka?

Thanks



 
Reply With Quote
Old 10-03-2011, 12:40 AM   #2
SwampassJ
Recipes 
 
Mar 2010
Coral Springs, FL
Posts: 2,161
Liked 37 Times on 34 Posts


1. It varies. Sometimes you can get away with very little depending on yeast and temperature and other times you need more. I had a 5 gallon batch of apfelwein almost overwhelm a 7.9 gallon bucket. Certain yeast strains can be done with mere inches, I forget which ones though.

2. Sanitized water (Idophore, starsan etc) or some good cheap 80proof works too. Just enough to prevent air fro coming back in and a enough to be good for a few days without it evaporating. Make sure you keep an eye on it. Also temperature changes will cause it to suck back into the carboy sometimes, 80proof is my preferred choice over starsan.


__________________
BLAH BLAH BLAH

 
Reply With Quote
Old 11-29-2011, 02:24 AM   #3
mdpolakow
Recipes 
 
Nov 2011
colchester, Connecticut
Posts: 13

#2 is pretty well answered by SwampassJ. My $0.02 for 1 based on my experience is that as long as whatever you are fermenting in has a good seal you will be ok. I have done many 3 gal batches in 6 gal carboys and have not lost one yet. At the start I used to blast them with Co2 from my keezer but lately I just let em go. Just remember to keep a good seal once it gets going.

 
Reply With Quote
Old 04-20-2013, 04:47 PM   #4
TheBrewWarrior
Recipes 
 
Mar 2013
Louisville
Posts: 31


I'm looking at a 6 gallon batch right now, and hoping it'll fit in a 6.5 gallon carboy with California ale yeast. Temp will be something around 68F-70F. Any thoughts on if it'll be okay?

I've always had more than enough space with 5 gallon batches, but 6 gallons makes me a little nervous.

 
Reply With Quote
Old 04-20-2013, 07:14 PM   #5
Pickled_Pepper
Recipes 
 
Nov 2011
Atlanta, Georgia
Posts: 1,245
Liked 75 Times on 66 Posts


I would use a blowoff tube just in case. I typically don't get as vigorous of a fermentation with cider as I do with beer, but at those temps it could get messy with only a half gallon of headspace.

 
Reply With Quote
Old 04-21-2013, 01:04 PM   #6
wadefisher
Brew Meister
HBT_LIFETIMESUPPORTER.png
 
wadefisher's Avatar
Recipes 
 
Jul 2009
Lewistown / Dade City, PA / FL
Posts: 278
Liked 10 Times on 8 Posts


Quote:
Originally Posted by TheBrewWarrior View Post
I'm looking at a 6 gallon batch right now, and hoping it'll fit in a 6.5 gallon carboy with California ale yeast. Temp will be something around 68F-70F. Any thoughts on if it'll be okay?

I've always had more than enough space with 5 gallon batches, but 6 gallons makes me a little nervous.
This sounds like blow off country.

I use WLP 775 and very little head space needed.

But CA Ale...... ? If it were a beer i'd say not enough head space. Especially at those temps.
__________________

www DrunkMonkeyBrewWerks dot com

TheBrewWarrior Likes This 
Reply With Quote
Old 04-21-2013, 01:31 PM   #7
TheBrewWarrior
Recipes 
 
Mar 2013
Louisville
Posts: 31


Quote:
Originally Posted by wadefisher View Post
This sounds like blow off country.

I use WLP 775 and very little head space needed.

But CA Ale...... ? If it were a beer i'd say not enough head space. Especially at those temps.
Ended up only putting in 5.5 gallons in the 6.5, and it looks okay so far. I've never used a blow off before. I'm gonna run to the store today, and get the tubing and such. Thanks for the advice.

 
Reply With Quote
Old 04-22-2013, 03:34 PM   #8
Pickled_Pepper
Recipes 
 
Nov 2011
Atlanta, Georgia
Posts: 1,245
Liked 75 Times on 66 Posts


The bottom portion of a 3 piece airlock works well to attach the tubing to. Then it fits into a normal bung. I've seen and always thought it was a good idea to use large tubing (2"?) and just poke it into the top of the carboy. It fits tight and that way even if there's excessive pressure nothing...pops off.

TheBrewWarrior Likes This 
Reply With Quote
Old 04-29-2013, 03:41 PM   #9
TheBrewWarrior
Recipes 
 
Mar 2013
Louisville
Posts: 31


With about 5.5 gallons of wort in a 6.5 gallon carboy at temps from 66 to 68 (weather ended up going cold again, which was a plus!), there was plenty of head space. Beer should be about 5.8% to 6% ABV.

Everything looks great, but I'll definitely use a blow off the next time I do a batch larger than 5, just to be safe. Thanks for the help.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Head space winvarin Cider Forum 6 09-12-2011 12:08 AM
Head space in primary fermenter bontybont Cider Forum 5 09-01-2011 05:15 AM
Head space question and carbonation Varroa Cider Forum 3 10-15-2010 01:36 PM
Cider, head space bad? Dry Ice? qwasert Cider Forum 12 03-01-2009 06:06 PM
Head space? stokems Cider Forum 6 01-04-2009 08:35 PM


Forum Jump