We get this question 3-4 times every day, so you're not alone. And in reality, nothing's wrong.
It's a pretty common issue for ANYONE topping off with water in the fermenter (and that includes partial mashes, extract or all grain revcipes) to have an error in reading the OG...In fact, it is actually nearly impossible to mix the wort and the top off water in a way to get an accurate OG reading...
Brewers get a low reading if they get more of the top off water than the wort, conversely they get a higher number if they grabbed more of the extract than the top off water in their sample.
When I am doing an extract with grain recipe I make sure to stir for a minimum of 5 minutes (whipping up a froth to aerate as well) before I draw a grav sample and pitch my yeast....It really is an effort to integrate the wort with the top off water...This is a fairly common new brewer issue we get on here...unless you under or over topped off or the final volume for the kit was 5 gallons and you topped off to 5.5, then the issue, sorry to say, is "operator error"
More than likely your true OG is really what it's supposed to be. And it will mix itself fine during fermentation.
And just use the number it says in the instructions as the true OG, because it will be.
So the answer is, relax and do nothing.
Like my snazzy new avatar? Get Sons of Zymurgy swag, here,
and brew with the best.
Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman
I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew