Please look at my Porter Recipe - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Please look at my Porter Recipe
Cool Brewing Corny 5G & Mini Giveaway
Sign-up To NEW HBT Article Newsletter - Brewing Articles Direct To You!

Reply
 
Thread Tools
Old 09-27-2011, 05:58 PM   #1
zip100473
Recipes 
 
Join Date: May 2011
Location: , mn
Posts: 63
Liked 1 Times on 1 Posts


Please send me any advice. This is my first all grain porter recipe.

Mash @ 153 Sparge @ 170

WL006 Bedford British Yeast

Maris Otter
38ppg, 3L 8 pounds
68.2%
Chocolate
29ppg, 350L 0.75 pounds
6.4%
Carafoam
33ppg, 1.5L 0.6 pounds
5.1%
Oats (Flaked)
32ppg, 2L 0.5 pounds
4.3%
Wheat (Flaked)
36ppg, 2L 0.5 pounds
4.3%
Biscuit
35ppg, 25L 0.5 pounds
4.3%
Simpsons medium crystal
34ppg, 55L 0.5 pounds
4.3%
Simpsons Dark Crystal
36ppg, 75L 0.25 pounds
2.1%
Black Patent
27ppg, 500L 0.13 pounds
1.1%

Northern Brewer hops
9%, Whole 1 ounce
60 minutes (+0)

Goldings (Kent) hops
5%, Whole 1 ounce
20 minutes (+40)


zip100473 is offline
 
Reply With Quote
Old 09-27-2011, 06:25 PM   #2
android
Recipes 
 
Join Date: Jan 2009
Location: Ames, Iowa
Posts: 3,060
Liked 42 Times on 33 Posts
Likes Given: 3


i think you might have a bit too much going on in there. it's best to start simpler and then add things in after you've had a chance to taste it and revise the recipe. i think the hops and mash schedule look good. i would take either the oats or the wheat, or both, out of the recipe. you don't need both oats and wheat, it may end up with too much body. and consider taking out the carafoam, the oats/wheat will take care of that for you (as will the crystal malts). i also don't think the biscuit malt is necessary since you are using marris otter as your base. i would go with something like this:

MO - 8#
Med. Crystal - 0.75 #
Chocolate - 0.5 #
Black Patent - 0.13 #
Wheat/Oats - 0.5 ish #

Adjust the base malt as necessary to get whatever starting gravity you need.


__________________
primary: APA

ebay temp controller | thermostat temp controller
android is offline
 
Reply With Quote
Old 09-27-2011, 06:33 PM   #3
eltorrente
Recipes 
 
Join Date: Aug 2011
Location: baltimore, md
Posts: 495
Liked 63 Times on 45 Posts
Likes Given: 34


Simplify that recipe - too much stuff going on there. Best to keep it simple. It's just a Porter, and only needs a few grains to make a good one.

I would ditch the biscuit, wheat, and oats for a start.
eltorrente is offline
 
Reply With Quote
Old 09-27-2011, 06:41 PM   #4
zip100473
Recipes 
 
Join Date: May 2011
Location: , mn
Posts: 63
Liked 1 Times on 1 Posts


Quote:
Originally Posted by android View Post
i think you might have a bit too much going on in there. it's best to start simpler and then add things in after you've had a chance to taste it and revise the recipe. i think the hops and mash schedule look good. i would take either the oats or the wheat, or both, out of the recipe. you don't need both oats and wheat, it may end up with too much body. and consider taking out the carafoam, the oats/wheat will take care of that for you (as will the crystal malts). i also don't think the biscuit malt is necessary since you are using marris otter as your base. i would go with something like this:

MO - 8#
Med. Crystal - 0.75 #
Chocolate - 0.5 #
Black Patent - 0.13 #
Wheat/Oats - 0.5 ish #

Adjust the base malt as necessary to get whatever starting gravity you need.
What about using Roasted Barley in place of black?
zip100473 is offline
 
Reply With Quote
Old 09-27-2011, 11:45 PM   #5
944play
Recipes 
 
Join Date: Jul 2008
Location: Santa Rosa, CA
Posts: 2,725
Liked 46 Times on 41 Posts
Likes Given: 56


RB has an ashen flavor that's better for a Stout, where a Porter should have the slight acrid/tarry note you get from Patent. 2 oz won't really matter though.

+1 for simplicity and android's advice.
__________________
OD: ?
Pri:-
Keg: Simple AIPA (2-row, Chinook, Cascade, WLP090)
944play is offline
 
Reply With Quote
Old 09-28-2011, 12:47 AM   #6
zip100473
Recipes 
 
Join Date: May 2011
Location: , mn
Posts: 63
Liked 1 Times on 1 Posts


Thanks. Might bump it just a touch. Sticking with the black...
zip100473 is offline
 
Reply With Quote
Old 09-28-2011, 02:48 AM   #7
android
Recipes 
 
Join Date: Jan 2009
Location: Ames, Iowa
Posts: 3,060
Liked 42 Times on 33 Posts
Likes Given: 3


Quote:
Originally Posted by 944play View Post
RB has an ashen flavor that's better for a Stout, where a Porter should have the slight acrid/tarry note you get from Patent. 2 oz won't really matter though.
i just brewed a porter with 4 oz of black patent. it seems just about right, but i would consider toning it down a tad in the future (maybe split the difference with 3?), you definitely know it's in there.

and i think you can bump the crystal malt up to a pound or so if you want and bump the chocolate up to .75 (it was about 400 *L) if you want a bit more from that.


__________________
primary: APA

ebay temp controller | thermostat temp controller
android is offline
 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone have a Chocolate Porter recipe JasonToews All Grain & Partial Mash Brewing 17 07-03-2013 02:08 AM
Input on Porter Recipe CraigT All Grain & Partial Mash Brewing 5 04-17-2011 03:36 PM
Tweaked Robust Porter Recipe...thoughts?? brentt03 All Grain & Partial Mash Brewing 2 04-12-2011 02:12 PM
H2O Treatment for Porter recipe CPooley4 All Grain & Partial Mash Brewing 1 11-27-2010 03:59 AM
I need a good Porter Recipe for my 1st AG BierMuncher All Grain & Partial Mash Brewing 9 01-24-2007 10:23 PM


Forum Jump