Extract Addition Timing - Page 4 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Extract Brewing > Extract Addition Timing
Sign-up To NEW HBT Article Newsletter - Brewing Articles Direct To You!

Thread Tools
Old 10-03-2011, 04:33 AM   #31
Feedback Score: 0 reviews
LandoLincoln's Avatar
Join Date: Feb 2011
Location: Joliet, IL
Posts: 2,988
Liked 1108 Times on 585 Posts
Likes Given: 36


My brewing buddies and I tried to do a late LME addition this weekend. It didn't go as we expected.

We were brewing a 10 gallon batch from two identical kits (NB Honey Brown Ale) and the kits came with 2 containers of LME (1 for each kit). We added the first container at beginning of boil and then added the second one at flameout, along with the 2 containers of honey for the batch. We stirred for a while and then added distilled water to bring the batch up to 10 gallons. Then we hooked up the CFC and hoses and opened up the spigot. What we thought was wort flowed through the clear hose to the chiller and then...nothing.

Minutes later, we finally figured out that it was mostly undissolved LME that was trying to get through my CFC. We closed the spigot, cleaned out the hoses and CFC, heated up the kettle for a few more minutes while stirring then tried again, with success.

After cleanup, we discovered that we had a goodly amount of scorching taking place under our built-in SS mesh screen that was fitted over our diptube.

So...two possibilities, I guess.

1) The LME just sank right down into our SS mesh screen and sat there, not being affected by the stirring taking place outside of the screen, waiting to be sucked up into the diptube.

2) We didn't stir long enough before adding the cold distilled water.

I think if we try this again, we'll probably add the last batch of LME 10-15 minutes before end of boil just to make sure the LME has had time to dissolve into the wort.

LandoLincoln is offline
Reply With Quote
Old 10-08-2011, 05:01 PM   #32
struggling author
Feedback Score: 0 reviews
unionrdr's Avatar
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 37,906
Liked 3498 Times on 3009 Posts
Likes Given: 2598


It'll still sink,that's the nature of the beast. It sounds like you're using an AG rig for extract. The screen can't hold it back,* it won't dissolve fast enough to keep it from doing it again.
My sci-fi & home brewing books on amazon-kindle now! New additions coming!
NEW, REVISED EDITION of book one of Time Lords 2034 series now on Amazon Kindle! http://www.amazon.com/dp/B00NTA0L6G
My homebrewing book "Tippy Tippy Tappy" on Kindle! http://www.amazon.com/dp/B00PBAP6JO
unionrdr is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
late extract addition bellyofbeer Extract Brewing 3 05-18-2011 12:08 PM
Late extract addition help PassionBeer Extract Brewing 2 04-23-2011 02:13 PM
Pro's and con's of extract addition timing? gartj Extract Brewing 16 06-23-2009 12:17 AM
Late extract addition help impulserush Extract Brewing 13 12-12-2008 08:42 PM
extract late method - timing question jamebow Extract Brewing 16 01-14-2007 08:57 PM

Forum Jump