Auber Instructions - Page 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Auber Instructions

Thread Tools
Old 09-16-2011, 12:13 AM   #11
Jan 2010
Posts: 723
Liked 100 Times on 69 Posts

In my opinion, you should have the GFCI breaker as far from the brewing area as possible. If you have it near the brewing area, and it gets hosed down with wort in an accident, you'll have live wires entering the spa panel whether the GFCI tripped or not.

Reason: clarification

Reply With Quote
Old 09-17-2011, 11:00 PM   #12
Mar 2010
Charlotte, NC
Posts: 3,336
Liked 302 Times on 235 Posts

Originally Posted by mavrick1903 View Post
PJ in the portable spa panel design we discussed, would you have the panel near the power source, or near the control box?. Also, what do you think about putting the resistor wire-eStop button on the top of the spa panel?
Sorry about the delay in responding.

I'd recommend that you place the SPA Panel away from your brew rig. In other words, don't mount it on your brewery rig but use a reasonable length of cord from your control panel to the SPA Panel. Just mount it on the wall in your brew area. No?

Re: The E-Stop. It does not matter where you place it on your controller. You just want it in a spot where you can easily hit it with your hand when things appear to be going wrong in a hurry. After all, I call it an E-Stop which is Emergency-Stop.

Hope this helps & I'm wishing you the best.


Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with Auber 2352 bendavanza Electric Brewing 3 08-16-2011 07:38 PM
Auber PID depth? kevink Electric Brewing 5 07-22-2011 10:27 AM
Auber ssr problem Gussymo Electric Brewing 9 06-07-2011 11:11 PM
Help with Auber 2352 PID Navy_Brewer Electric Brewing 0 04-05-2011 07:38 PM
Auber 2362 dboblitt Electric Brewing 2 03-15-2011 03:09 AM

Forum Jump