120v/2000w & 240v/5500w together in keggle - Page 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > 120v/2000w & 240v/5500w together in keggle

Thread Tools
Old 09-16-2011, 12:24 PM   #11
flananuts's Avatar
Dec 2008
Monmouth County, NJ
Posts: 506
Liked 1 Times on 1 Posts

sounds like you have it worked out then. Are you planning on having the element nuts welded on your pot or are you using weldless? And are you using a beer keg for a BK or a SS pot?

Reply With Quote
Old 09-17-2011, 05:42 AM   #12
Dec 2009
Holland, MI
Posts: 98
Liked 2 Times on 2 Posts

I've been lurking around here for a while so...Um... yeah...Some people might say I've got a plan. I have 20qt., 36qt. kettles & a converted keg. Planing to solder fittings in like in the SS sticky at the top of the DIY page. The two small kettles will be for BIAB, The keggle will be AG with a cooler MT for now & BIAB when I get a basket. The 120v/20qt is coming together, the others will be completed as $$ allow. The end goal is a recirculating, portable & consistent system capable of 5 capacities, (3g,5g,8g,10g &13g).

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scorching - 2000w 120v LWD or ULWD Avail? Jknapp Electric Brewing 16 01-24-2012 12:30 PM
Need PID and SSR advice for 120v 2000w HERMS vessel Twang Electric Brewing 7 07-06-2011 08:05 PM
120v 2000W Kettle? Jaimez Electric Brewing 12 06-05-2011 04:24 AM
Anyone use a 240V 4500-5500W heatstick? magnj Electric Brewing 25 02-22-2011 10:34 PM
Strange issue with 240v legs. 120v on both, no 240v Brewmoor Electric Brewing 5 12-03-2010 07:15 PM

Forum Jump