Help picking a drip tray - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Help picking a drip tray

Thread Tools
Old 09-05-2011, 07:00 PM   #1
May 2011
Tucson, AZ
Posts: 71

So I am in the middle of a kegerator build(ill have a build thread up later today). It is going to be covered in wood. It will have stained pine for a border with tongue and goove on the sides. For the top, I have built a new tower out of wood. I plan on screwing this to a piece of plywood painted black. I am going to glue pennies to that and then cover it with epoxy to make a penny bar top of sorts with the stained pine for the border. My question is about a drip tray. I am concerned that stainless will clash with the pennies and stained wood. I have thought about making my own tray from a register cover as I have seen others do. But I still dont know what finish to go with for that. I saw that they make brass finished register covers which might look ok. Any ideas?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Drip tray, Recessed sjlammer Kegerators & Keezers 20 09-13-2013 07:05 PM
DIY Drip Tray splobucket Kegerators & Keezers 15 07-05-2012 05:32 PM
need help with drip tray zmurda Kegerators & Keezers 7 02-01-2011 05:49 PM
Drip Rag instead of Drip Tray? Cpt_Kirks Kegerators & Keezers 9 02-22-2010 11:57 PM
drip tray farrout Kegerators & Keezers 2 04-01-2009 05:38 AM

Forum Jump