1/4 inch pipe nipple left hand thread - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > 1/4 inch pipe nipple left hand thread

Reply
 
Thread Tools
Old 09-03-2011, 07:39 PM   #1
DariusFresh
Recipes 
 
Jun 2011
Garner, NC
Posts: 34


I am adding a 2nd regulator for independent pressure control. I need a section of 1/4 inch left hand pipe that is left hand thread. Everything I could find local was right handed. I thought getting all of the plugs and stems out was gonna be the hardest part!

http://www.beveragefactory.com/draft...ple_left.shtml
I found this online, but don't know if it would be long enough to use for a connection between two regulators. It is listed as a nipple to connect a gauge. Anyone know where I can find this part?

 
Reply With Quote
Old 09-04-2011, 12:36 AM   #2
beaksnbeer
HBT_LIFETIMESUPPORTER.png
 
beaksnbeer's Avatar
Recipes 
 
May 2011
New Port Richey, Florida
Posts: 2,844
Liked 505 Times on 334 Posts


Try a welding supply or where ever you get your CO2 they have all that and more.....my.02

 
Reply With Quote
Old 09-04-2011, 01:01 AM   #3
Malticulous
Recipes 
 
Aug 2008
St. George Utah
Posts: 4,143
Liked 72 Times on 57 Posts


Midwest sells it
http://www.midwestsupplies.com/regul...nd-thread.html
__________________
Everything is better with a beer.

 
Reply With Quote
Old 09-06-2011, 02:13 PM   #4
DariusFresh
Recipes 
 
Jun 2011
Garner, NC
Posts: 34

thank you so much! putting in my order today!

 
Reply With Quote
Old 11-07-2011, 12:02 AM   #5
ShortBusBrewing
Recipes 
 
Feb 2010
IL
Posts: 4

Thanks for the info I was just looking for the same thing and was going nuts trying to find it!!!!!!

 
Reply With Quote
Old 08-20-2012, 03:41 PM   #6
jabobs
Recipes 
 
Mar 2011
Buffalo Grove, IL
Posts: 19

I bought a 3 gauge Taprite regulator, but then needed a 4th regulator added on. The 3 gauge one is all normal right hand threads, but the new also Taprite brand add on Gauge is left hand threaded. So I need to find that same 2" - 1/4" connection stem, but need it left hand threaded on one side, and right hand threaded on the other side.

Anyone have any ideas of where to find this?

 
Reply With Quote
Old 08-20-2012, 04:57 PM   #7
PapaO
Recipes 
 
Feb 2011
Chicago Subs, IL
Posts: 191
Liked 38 Times on 30 Posts


Quote:
Originally Posted by jabobs View Post
I bought a 3 gauge Taprite regulator, but then needed a 4th regulator added on. The 3 gauge one is all normal right hand threads, but the new also Taprite brand add on Gauge is left hand threaded. So I need to find that same 2" - 1/4" connection stem, but need it left hand threaded on one side, and right hand threaded on the other side.

Anyone have any ideas of where to find this?
Midwest sells it.
http://www.midwestsupplies.com/regul...-thread-2.html

 
Reply With Quote
Old 08-21-2012, 01:46 AM   #8
beaksnbeer
HBT_LIFETIMESUPPORTER.png
 
beaksnbeer's Avatar
Recipes 
 
May 2011
New Port Richey, Florida
Posts: 2,844
Liked 505 Times on 334 Posts


Paid a buck apiece for mine at supply house no shipping or waiting.
__________________
Quote:
Home of the 12 Tap keezer

 
Reply With Quote
Old 08-21-2012, 02:07 AM   #9
jabobs
Recipes 
 
Mar 2011
Buffalo Grove, IL
Posts: 19

Picked it up from midwest. only $3 but $6 in shipping, so not so great but gotta get this project done.
Unfortunately they didnt have a left hand threaded plug, nor did Home Depot. So i used that as an excuse to place a order at beveragefactory.com for the $1 part and got a sanke tap, some hoses, etc and balooned my bill......this always happens. :-)

 
Reply With Quote
Old 11-11-2013, 09:07 PM   #10
TravTins
Recipes 
 
Dec 2011
Poplar Bluff, MO
Posts: 9


I see this post was from 2011, i am doing the same thing to my regulators and it was hard to find the part. I ended up finiding it at micromatic.com . it was the most reasonable. still cost me almost $12 after shipping.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
need random pipe nipple! motobrewer Equipment/Sanitation 3 04-11-2011 08:15 PM
nipple inside welded keggle pipe? basline Equipment/Sanitation 13 03-11-2011 05:40 PM
pipe thread sealant: ok? nbspindel Equipment/Sanitation 5 06-05-2010 08:10 PM
O2 bottle left hand threaded MikeG Equipment/Sanitation 1 09-09-2009 01:10 AM
Where to buy a left hand 1/4" pipe die? Old_Brewer Equipment/Sanitation 3 05-01-2008 02:31 PM


Forum Jump