Keeping that Freezer dry? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Keeping that Freezer dry?

Reply
 
Thread Tools
Old 08-30-2011, 10:49 PM   #1
WHYB
Recipes 
 
Jan 2011
Nottingham, NH
Posts: 76
Liked 1 Times on 1 Posts



The bucket of damprid isn't enough, to be fair though, I do tend to open the lid almost daily as I keep bottled beer as well.

Any experiences with those mini dehumidifiers I'm seeing out there?

Thanks

 
Reply With Quote
Old 08-30-2011, 11:20 PM   #2
jaycount
 
jaycount's Avatar
Recipes 
 
Dec 2010
Wichita, Kansas
Posts: 996
Liked 22 Times on 22 Posts


Is your issue condensation? I am having the same thing going on...

 
Reply With Quote
Old 08-30-2011, 11:21 PM   #3
alowell
 
alowell's Avatar
Recipes 
 
Mar 2010
Boulder, CO, Colorado
Posts: 232
Liked 4 Times on 4 Posts


I use this guy, seems to do the job fairly well in my keezer. Check for air leaks around the seal as well.

Eva-dry EDV-E-500 Renewable Wireless Mini Dehumidifer

http://www.amazon.com/Eva-dry-EDV--R...4746419&sr=8-1
__________________
Lowell Brewing Co.

 
Reply With Quote
Old 08-30-2011, 11:33 PM   #4
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


Excessive condensation is an indication of an air leak somewhere. Even a tiny pinhole leak can cause problems. The obvious place to check first would be the lid seal, but also check the joints on the collar if you have one installed. A shop vac can be used to remove accumulated condensation/spillage with little effort.

 
Reply With Quote
Old 08-31-2011, 12:01 AM   #5
WHYB
Recipes 
 
Jan 2011
Nottingham, NH
Posts: 76
Liked 1 Times on 1 Posts


Quote:
Originally Posted by alowell View Post
I use this guy, seems to do the job fairly well in my keezer. Check for air leaks around the seal as well.

Eva-dry EDV-E-500 Renewable Wireless Mini Dehumidifer

http://www.amazon.com/Eva-dry-EDV--R...4746419&sr=8-1

Thanks, might give this a try.

 
Reply With Quote
Old 08-31-2011, 12:09 AM   #6
WHYB
Recipes 
 
Jan 2011
Nottingham, NH
Posts: 76
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Catt22 View Post
Excessive condensation is an indication of an air leak somewhere. Even a tiny pinhole leak can cause problems. The obvious place to check first would be the lid seal, but also check the joints on the collar if you have one installed. A shop vac can be used to remove accumulated condensation/spillage with little effort.
No collar on mine and the seal is good, I know a good part of the problem is me, as I'm digging into the thing, rummaging for bottles. If it's an expectation issue then I'm ok with that, just curious if something like a mini dehumidifier can keep up.

 
Reply With Quote
Old 08-31-2011, 05:48 AM   #7
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


Quote:
Originally Posted by WHYB View Post
No collar on mine and the seal is good, I know a good part of the problem is me, as I'm digging into the thing, rummaging for bottles. If it's an expectation issue then I'm ok with that, just curious if something like a mini dehumidifier can keep up.
The micro-dehumidifiers probably won't keep up if you have a lot of condensation which it sounds like you do. It's expected during high humidity seasons and especially so if you are opening it up a lot. I usually just ignore any accumulation until it gets to be 1/4" deep or so then I vac it out. That is usually about every month or so, but often I will spill some beer and that prompts me to do a cleanup prematurely. I also installed some of that interlocking rubber grid type tile on the floor of the freezer so the kegs are not sitting in a puddle. I've also used an "Absorber" synthetic chamois thing used for drying off autos etc. I spread a couple of those out on the floor of the freezer and they really soak up a lot of water. You can then easily wring them out occasionally. You can get them at Autozone or most other auto parts places for about $10 or so. They last forever. I tried the Damp Rid stuff and was not impressed.

 
Reply With Quote
Old 08-31-2011, 06:18 AM   #8
AZ_IPA
PKU
HBT_LIFETIMESUPPORTER.png
 
AZ_IPA's Avatar
Recipes 
 
Jun 2008
The Cold Part of AZ
Posts: 52,380
Liked 8614 Times on 6927 Posts


good thread...

my keezer is showing some water in the bottom despite the Eva-Dry.

I'm sure it's a combo of me being to lazy to adequately seal the A419 and fan cords, and opening the lid lots...

I should try some damp rid.

 
Reply With Quote
Old 08-31-2011, 02:39 PM   #9
horseinmay
Recipes 
 
May 2011
Lakewood, California
Posts: 227
Liked 12 Times on 10 Posts


I've had good luck with a renewable granular silica that I got from a gun supply shop. You can buy it by the pound, and they're blue beads that turn pink once they've absorbed their fill of humidity. You can recharge them by drying out in the oven (300 for 2-3 hours)

 
Reply With Quote
Old 08-31-2011, 02:49 PM   #10
GilaMinumBeer
HBT_LIFETIMESUPPORTER.png
 
GilaMinumBeer's Avatar
Recipes 
 
Jan 2008
Posts: 58,372
Liked 7415 Times on 6081 Posts


Put your bottle in your normal fridge and keep the keezer door shut!

I keep cellaring beer in the keezer and kegs. And have no condensation.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keeping 6 Cornies Cold zoso124 Kegerators & Keezers 2 06-30-2011 11:33 PM
making freezer warmer in fridge/freezer combo kegerator sideshow_ben Kegerators & Keezers 1 03-12-2011 02:35 PM
Keeping the boil noblanks1969 Brew Stands 8 08-09-2010 10:36 PM
Help with keeping fermentor at right temp... Beavdowg Fermenters 17 06-12-2009 12:59 PM
Keeping Warm justin8425 Fermenters 16 12-15-2007 05:34 PM


Forum Jump