Speidel Braumeister questions - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Speidel Braumeister questions

Thread Tools
Old 08-28-2011, 09:51 PM   #1

I'm getting a 50 litre Braumiester next month or more likely October. There are already a few very long threads on this rig but I have a few questions so I thought I'd start another.

I'll be moving from 5 gallon rig with a 10 gallon Igloo cooler + big pots in the kitchen to this.

1. They offer a 20 litre malt pipe to fit in the 50 L one for smaller batches. Is this really necessary? Has anyone done 5 gallon batches in the 50 litre Braumeister? One advantage of getting the larger one is the option of doing much bigger beers without having to add extract. The existence of this brings this into question...?!

2. Is the insulated cover necessary? I use a Bucket Water heater to speed up my kitchen boils <http://www.amazon.com/gp/product/B000BDB4UG> so I assume this will work fine in the Braumeister also.

3. They offer a hugely expensive Copper hood for $400+ - I am a little confused as to why it is so expensive and whether there is any real additional functionality there?

4. Cleaning/sanitation. Right now I siphon my cooled wort into my carboy and obviously sanitize the siphon before. I am unsure how safe it is to pour the cooled wort from the Braumeister spigot into a fermenter without sanitizing - or does the boil take care of this?

5. Speaking of cooling how does a 50-75' immersion cooler work in this thing?

Thanks for your responses.


Reply With Quote
Old 11-30-2011, 11:06 AM   #2
Feb 2011
Grafton, NSW
Posts: 5

I thought there were some good questions here - have these already been answering in another thread?

Reply With Quote
Old 12-02-2011, 11:25 PM   #3
Dec 2010
Parker, CO
Posts: 119
Liked 2 Times on 2 Posts

Not familiar with the Braumiester but have a comment or two.

item 4. cooled wort is always at risk of infection. Use Starsan or bleachwater to sanitize anything that touches cooled wort.

item 5. Don't bother with an immersion chiller. Get a counterflow or a plate chiller, you will fondly remember the day you made that choice (at least I do).

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions on the eve of my first AG monty3777 All Grain & Partial Mash Brewing 3 09-17-2009 11:33 PM
A few pre-AG questions snipper_cr All Grain & Partial Mash Brewing 3 06-16-2009 08:55 PM
1st ag questions jp1316 All Grain & Partial Mash Brewing 3 05-26-2009 04:43 PM
2 questions on AG MN_Jay All Grain & Partial Mash Brewing 5 08-26-2008 02:08 PM
Some PM Questions Yin_Yang All Grain & Partial Mash Brewing 8 08-18-2008 03:06 PM

Forum Jump