Predicting Mash pH with EZ Calculator by Diluting Strike H2O with Lower pH H2O - Home Brew Forums

 Home Brew Forums > Predicting Mash pH with EZ Calculator by Diluting Strike H2O with Lower pH H2O

08-25-2011, 12:36 PM   #1
jaythebassist

Recipes

Jul 2010
central NJ
Posts: 95

Is there a way for me to predict a change in mash pH based on adding a specific volume of strike water at a different pH than the rest? I would do this because a. I don't have any 88% lactic acid or acidulated malt on hand, and b. I have a sour mash ready to use (with an unknown acid content).

Example: IIPA

------------

Starting Water (ppm):
Ca: 87
Mg: 15
Na: 28
Cl: 69
SO4: 48
CaCO3: 186

Mash / Sparge Vol (gal): 5 / 4.2
RO or distilled %: 0% / 0%

Total Grain (lb): 16.3

Adjustments (grams) Mash / Boil Kettle:
CaSO4: 0 / 0
CaCl2: 0 / 0
MgSO4: 0 / 4
NaHCO3: 0 / 0
CaCO3: 0 / 0
Lactic Acid (ml): 0
Sauermalz (oz): 0

Mash Water / Total water (ppm):
Ca: 87 / 87
Mg: 15 / 26
Na: 28 / 28
Cl: 69 / 69
SO4: 48 / 93
Cl to SO4 Ratio: 1.44 / 0.74

Alkalinity (CaCO3): 186
RA: 115
Estimated pH: 5.80
(room temp)

---------

Now, I could add 4ml of 88% lactic acid to bring the mash pH down to 5.67 and in the desired range. But I don't have any lactic acid yet (and won't have it in time for my brewday). I do have 3 qts of sour mash that made, and I'd like to use some of that lactic in my mash to get in range. Problem is, I have no idea what acid content it contains.

Hypothetically, let's say I pull a gallon of strike water made up with 104 oz tap & 24 oz of my sour mash (3.5 pH) in it, mix well, and get a pH reading of 7.4. Is there an effective way for me to predict the change in pH that gallon will have on the whole mash? Of course, I know I can just mash in and then keep adding the sour and stirring until the pH corrects, but since I have to wait for the sample to cool, etc, getting the prediction is clutch.

Hope this isn't a ridiculous question to ask.

I guess I could alternatively ask is there an easy way for me to figure out the acid content in my sour mash? (I know the pH reads 3.5 and my tap water is 8.3)
__________________
Quote:
 Originally Posted by JRems Don't forget they are in jersey, it probably "fell off the back of a truck".

08-25-2011, 01:18 PM   #2
ajdelange
Recipes

Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,418
Liked 1562 Times on 1188 Posts

The pH of the mix will depend on
1. The alkalinity of the water
2. The acidity of the mash
3. The buffering capacity of the malt

As you don't really know any of these with the exception of the first I'd suggest you make a small test mash and add the sour mash to that incrementally until you reach the pH you want. Then scale up to the full mash. Adding sour mash to grist to adjust pH is a time honored tradition.

08-25-2011, 01:44 PM   #3
jaythebassist

Recipes

Jul 2010
central NJ
Posts: 95

Quote:
 Originally Posted by ajdelange The pH of the mix will depend on 1. The alkalinity of the water 2. The acidity of the mash 3. The buffering capacity of the malt As you don't really know any of these with the exception of the first I'd suggest you make a small test mash and add the sour mash to that incrementally until you reach the pH you want. Then scale up to the full mash. Adding sour mash to grist to adjust pH is a time honored tradition.
I gotcha AJ, but aren't numbers 2 and 3 accounted for in the EZ water calculator? That's what I'm asking.. if I manually modify the pH of the strike water how can I get that info into the spreadsheet?
__________________
Quote:
 Originally Posted by JRems Don't forget they are in jersey, it probably "fell off the back of a truck".

08-25-2011, 02:05 PM   #4
ajdelange
Recipes

Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,418
Liked 1562 Times on 1188 Posts

The acidity of lactic acid and sauermalz are modeled in the spreadsheet but not your particular sour mash. It's certainly not 88% lactic acid and is probably less than 2% based on sauerrmalz being dry and your mash being wet.

08-25-2011, 07:29 PM   #5
jaythebassist

Recipes

Jul 2010
central NJ
Posts: 95

Here's a question that can help me get there.. does pH in water dilute in a linear fashion?

Ex: (true or false)

100 oz of 7.0 pH + 12 oz of 1.0 pH = 112 oz of 6.35 pH
-or-
100 oz @ 7.0 pH + 100 oz @ 5.0 pH = 200 oz @ 6.0 pH
__________________
Quote:
 Originally Posted by JRems Don't forget they are in jersey, it probably "fell off the back of a truck".

08-25-2011, 07:47 PM   #6
ajdelange
Recipes

Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,418
Liked 1562 Times on 1188 Posts

No, not at all. In the first example lets change oz to mL (the proportions are still the same but the calculations are much easier in metric). If we put 0.1 mol hydrochloric acid in 1 L of water we would have water with pH about 1. 12 mL of this would contain 0.1*12/1000 =.0012 mol H+. Mixed in with 100 mL of water at pH 7 (which contains 0.0000001 mol H+ per liter the total H+ content would be 0.0012/0.112 = 0.0000107143 mol/L for a pH of 4.97. OTOH 100 mL of water at pH 7 contains 0.1* 1E-7 mol and 100 mL of water at pH 5 contatins 0.1*1E-5 for a total concentration of 0.1*1.01E-5/0.2 = 5.5e-7 for a pH of 5.26.

And that's a simple case. If a buffer were involved the ability of acid or base to "pull" the pH depends on the strength of the buffer.

Reason: Math error

08-25-2011, 08:54 PM   #7
jaythebassist

Recipes

Jul 2010
central NJ
Posts: 95

Quote:
 Originally Posted by ajdelange No, not at all. In the first example lets change oz to mL (the proportions are still the same but the calculations are much easier in metric). If we put 0.1 mol hydrochloric acid in 1 L of water we would have water with pH about 1. 12 mL of this would contain 0.1*12/1000 =.0012 mol H+. Mixed in with 100 mL of water at pH 7 (which contains 0.0000001 mol H+ per liter the total H+ content would be 0.0012/0.112 = 0.0000107143 mol/L for a pH of 4.97. OTOH 100 mL of water at pH 7 contains 0.1* 1E-7 mol and 100 mL of water at pH 5 contatins 0.1*1E-5 for a total concentration of 0.1*1.01E-5/0.2 = 5.5e-7 for a pH of 5.26. And that's a simple case. If a buffer were involved the ability of acid or base to "pull" the pH depends on the strength of the buffer.
you had me at "no". lol

I'll go with the test mash.
__________________
Quote:
 Originally Posted by JRems Don't forget they are in jersey, it probably "fell off the back of a truck".

 Similar Threads Thread Thread Starter Forum Replies Last Post -TH- Brew Science 404 11-02-2016 01:35 AM TurboBrew Brew Science 13 01-23-2012 06:51 PM BackAlleyBrewingCo Brew Science 19 07-20-2011 02:24 PM promontory Brew Science 6 02-17-2011 04:18 PM JLem Brew Science 9 01-19-2010 03:36 PM

 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Sponsor Showcase     Sponsor Showcase Home Brewing Beer     Beginners Beer Brewing Forum     General Beer Discussion     Fermentation & Yeast     All Grain & Partial Mash Brewing     BIAB Brewing     Extract Brewing     Gluten Free Brewing     General Techniques     Recipes/Ingredients     Equipment/Sanitation     Electric Brewing     Automated Brewing Forum     DIY Projects         Kegerators & Keezers         Brew Stands         Cleaners & Cleaning         Chillers & Stir Plates         Kettles, Mash Tuns & Hot Liquor Tanks         Fermenters     Bottling/Kegging     Label Display & Discussion     Brew Science     Lambic & Wild Brewing     Hops Growing     Home Brewing Photo Forum     Brewing Software Wine, Mead, Cider, Sake & Soda     Winemaking Forum     Mead Forum     Cider Forum     Soda Making     Kombucha & Fermented Tea Forum HomeBrewTalk.com Recipe Database     Homebrew Lager Recipes     Homebrew Ale Recipes     Homebrew Sours & Wilds Recipes     Specialty, Fruit, Historical, Other Homebrew Recipes     Mead Recipes     Wine Recipes     Cider Recipes Home Brew Market     Sampling and Critiquing and Beer Swapping     For Sale     Want to Buy     Group Buys     Homebrew Crowdfunding Food and Beverage     Cheese Making Forum     Cooking & Pairing     Coffee Brewing & Roasting     Meat Smoking, Curing and Sausage Making Home Brewing Community     General Chit Chat     Drunken Ramblings and Mindless Mumbling     Commercial Brew Discussion     Beer Blogs & Articles     Company Reviews Brewing Events & Local Gatherings     North West Homebrew Forum     South West Homebrew Forum     Great Lakes Homebrew Forum     South East Homebrew Forum     North East Homebrew Forum     North Central Homebrew Forum     South Central Homebrew Forum     International