mislocated thermometer hole - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > mislocated thermometer hole

Reply
 
Thread Tools
Old 08-11-2011, 06:55 PM   #1
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,025
Liked 27 Times on 24 Posts



Ok didn't think this through before i did it.

I recently started mashing in a keggle. I use a full false bottom and recirculate with a march pump if i need to fire for temp maintenance. I batch spare for now since i only have one pump. I have been slowly adding parts to my system as i go. I added a themometer recently with one of the no weld kits from bargainfittings. I installed it too high. Its only under my grain bed when Im mashing for a 10 gallon bash. So i need to relocate the thermometer lower and find another use for this hole. I still need to rig a return for the recirculation as i was just going over the top with the hose. Now, how to use this hole that is below the grain bed some of the time as a return. I guess my plan would be to add another bulkhead and valve there. Its the inside that im wondering. How about a elbow with a section of silicone hose and a way to diffuse it so im not channeling the grain bed. The silicone tubing could also allow an easy way to adjust it when im mashing smaller or larger batches. Will this work?
__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

 
Reply With Quote
Old 08-11-2011, 06:57 PM   #2
Rivenin
Recipes 
 
Dec 2010
McMinnville, Oregon
Posts: 3,234
Liked 326 Times on 253 Posts


sooo.. you're just looking to plug that extra hole i'm guessing? see if you can find a SS bolt? they have plug kits for the bulkheads
__________________
RAINYDAY BREWING AND WINERY McMinnville, OR - EST 2010
Coming up Mosaic Honey Wheat -
Primary Kool-aid malt liquor - Berlinerweisse
Kegged Berlinerweisse - Centennial blonde with Huell Mellon hops - same blonde but dry hopped with ella
240v - 4500w electric two tier

 
Reply With Quote
Old 08-11-2011, 07:27 PM   #3
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,025
Liked 27 Times on 24 Posts


well instead of just plugging it I would like to use it as a recirculation port since its drilled already
__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

 
Reply With Quote
Old 08-12-2011, 03:12 AM   #4
MadDwarf
 
MadDwarf's Avatar
Recipes 
 
Oct 2007
Redmond, WA
Posts: 138
Liked 5 Times on 4 Posts


I'm guessing it's going to be more trouble than it's worth to try and recirculate through a port below grain level. I'd just plug it for now and add your recirc port at the top if hooking the hose over the edge isn't what you want. You can always pick up a second thermometer for 10-gallon batches to make sure your heat is staying reasonably consistent throughout your grain bed while recirculating.
__________________
Anvil Horn Brewing

Fermenter:
Oatmeal Stout
Edwort's Apfelwein
American Pale

On Tap:
Honey Dunkelweizen
Wee Heavy Scotch
Edwort's Apfelwein

 
Reply With Quote
Old 08-12-2011, 02:46 PM   #5
Coldies
Recipes 
 
Oct 2010
Carlsbad, CA
Posts: 572
Liked 7 Times on 7 Posts


Well since you are going to put a recirculation port anyways I say use it where it is for a batch and slightly point the output upwards and see how it does. You could always attach a piece of high temp silicone hose and route it above the grain bed as well. If it doesnt work how you like it add another thermometer like suggested above and relocate your input hole.

 
Reply With Quote
Old 08-12-2011, 02:49 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,208
Liked 1662 Times on 1075 Posts


You would definitely want to be able to height adjust. How will you stop wort from pouring out when the hose isn't connected?
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 08-12-2011, 03:27 PM   #7
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


I made this custom fitting to fit through what used to be the thermometer port on my BK:



I see no reason why it would not work on your MT as a return port. You would only need to attach a riser pipe on the inside to deliver the wort to the top of the grain bed. I use it to circulate wort through my cfc and back to the kettle when chilling. I simply close the valve when nothing is attached. Basically, it's just a 1/2" sweat x npt adapater drilled out so the pipe can pass all the way through.

 
Reply With Quote
Old 08-12-2011, 04:18 PM   #8
Coldies
Recipes 
 
Oct 2010
Carlsbad, CA
Posts: 572
Liked 7 Times on 7 Posts


Quote:
Originally Posted by Bobby_M View Post
You would definitely want to be able to height adjust. How will you stop wort from pouring out when the hose isn't connected?
I assumed he would know to use a ball valve. But I should have been more clear.

 
Reply With Quote
Old 08-12-2011, 07:40 PM   #9
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,208
Liked 1662 Times on 1075 Posts


Well, I say that because most recirc ports I've seen, including my own, is up high enough that it doesn't need a valve. It usually has to drop down from that location. You could accomplish the same thing by sharply going up with a piece of tubing on the inside.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 08-14-2011, 07:39 PM   #10
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,025
Liked 27 Times on 24 Posts


thanks for all the replies, been out camping for the weekend so catching up now. I think ill go with the plan for recirculating through it. Ill through a ball valve on to make sure i never lose anything through it. Ill rig the inside to make it adjustable for different sized batches.

Thanks
__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mash tun hole too big! Help! MashTun-Kutcher Equipment/Sanitation 15 01-30-2011 09:52 AM
Blichmann Thermometer vs Bobby_M's EZ Weldless Sight/Thermometer Combo Pivzavod Equipment/Sanitation 14 07-18-2010 12:01 AM
Oak barrel with no hole Newlander Equipment/Sanitation 3 08-06-2008 10:33 PM
Hole for my thermometer MX1 Equipment/Sanitation 11 07-28-2008 05:18 PM
WTF 13/16 hole saw.. aekdbbop Equipment/Sanitation 23 09-19-2007 05:42 PM


Forum Jump