cutting holes in metal control box panel - Page 3 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > cutting holes in metal control box panel

Thread Tools
Old 09-14-2011, 06:04 PM   #21
Mar 2008
Posts: 268
Liked 6 Times on 6 Posts

I spent about 20 to get a real nice 7/8" hole saw for cutting out all of the conduit connections and 22mm swich locations. For the Controls (3 PIDs and 1 Timer) I used a jigsaw, it worked perfectly. The whole operation took me about 1/2 hour to lay out and about another 45 minutes to cut.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Control Panel VS Computer Bru Electric Brewing 14 01-26-2012 02:35 AM
Control panel stokems Electric Brewing 1 06-19-2011 10:56 PM
Yoopers New Control Panel lschiavo Electric Brewing 69 04-13-2011 01:39 PM
Toolbox control panel gclay Electric Brewing 1 04-11-2011 07:38 PM
Control Panel Breakers DeeDub76 Electric Brewing 4 01-26-2011 06:09 PM

Forum Jump