CARB ?'s - Home Brew Forums

Register Now!
Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Mead Forum > CARB ?'s

Reply
 
Thread Tools
Old 07-29-2011, 03:43 PM   #1
JNOYES88
Recipes 
 
Jul 2011
ROCK FALLS, IL
Posts: 64


I'm doing my first 5 gallon batch of cider. I transfered to my secondary carboy last night. Original reading before going into the primary was 1.060 and reading after putting it into the secondary was 1.008. Fermentation seems to be actually going faster now that when it was in the primary.

I'm looking to get a fizzy cider once bottled and aged.

I'm using a belgian strong ale yeast that is supposed to ferment up to 12-13 percent ABV. What should the hydrometer reading be at when bottling? Ive heard 1.005 to 1.000. OR how many bubbles per minute? Or is there a better way to figure this out?

HELPPP

ANY HELP OR ADVICE IS APPRECIATED!

Reason: courtesy

 
Reply With Quote
Old 07-29-2011, 06:02 PM   #2
frydogbrews
Registered User
Recipes 
 
May 2011
nowhere, mo
Posts: 2,763
Liked 46 Times on 46 Posts


ooooh...watch the "bubbles per minute" talk, them's fighting words around here sometimes. ha.
when you racked, you jostled things up a bit and got the yeasties to get active again and finish chomping things down. its' good and it usually blows at any remaining hydrogen sulfide.
like everything else, three identical hydrometer readings in a row on three different days will tell you when fermentation has stopped. i've never used that yeast before, but if it can take it all the way down to 1.000, way to go! please let me know if you do hit that, because i'll try it out if it can dry it down that much.

 
Reply With Quote
Old 07-29-2011, 06:22 PM   #3
MedsenFey
Recipes 
 
Jan 2010
Florida
Posts: 1,034
Liked 16 Times on 16 Posts


It should finish dry with a gravity slightly below 1.000 before you add priming sugars (if you plan to carbonate it).

 
Reply With Quote
Old 07-29-2011, 07:21 PM   #4
frydogbrews
Registered User
Recipes 
 
May 2011
nowhere, mo
Posts: 2,763
Liked 46 Times on 46 Posts


Medsen, do you think belgian strong ale yeast will take it that low? i always use various white wine yeasts and sometimes champagne yeasts for my ciders because i like them bone dry.

 
Reply With Quote
Old 07-29-2011, 07:56 PM   #5
MedsenFey
Recipes 
 
Jan 2010
Florida
Posts: 1,034
Liked 16 Times on 16 Posts


It should. The starting gravity is only 1.060 so the ABV will be about 9% and most Belgian ale yeast should be able to accomplish that without too much trouble.

 
Reply With Quote
Old 07-30-2011, 01:34 AM   #6
JNOYES88
Recipes 
 
Jul 2011
ROCK FALLS, IL
Posts: 64

Sorry about the ignorance of the B word! lol. So if it gets down to 1.000 which I believe it will, will our little yeast friends have enough strength to produce more carb adding the priming sugar? Plus this yeast strain is rated for between 11 and 13 ABV. Will there be too much alcohol for them to kick start and carbonate my bottles?

 
Reply With Quote
Old 07-30-2011, 01:41 AM   #7
JNOYES88
Recipes 
 
Jul 2011
ROCK FALLS, IL
Posts: 64

Plus if you guys want to know I used in this concoction: 4 gallons organic unpreserved, unsweetened apple juice, half gallon motts apple juice from concentrate, disolved 1 one lb bag of brown sugar + 1 pint raw honey + half lb of unsulfated raisins in half gallon of another motts apple juice + spring water (heated not boiled).

I plan on back sweetening slightly with xylitol.

Reason: forgot

 
Reply With Quote
Old 07-30-2011, 01:53 AM   #8
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,256
Liked 7742 Times on 5432 Posts


Quote:
Originally Posted by JNOYES88 View Post
Sorry about the ignorance of the B word! lol. So if it gets down to 1.000 which I believe it will, will our little yeast friends have enough strength to produce more carb adding the priming sugar? Plus this yeast strain is rated for between 11 and 13 ABV. Will there be too much alcohol for them to kick start and carbonate my bottles?
It should get lower than 1.000, maybe even to .990, so don't bottle it until it's stable and clear!

You should be able to bottle carbonate it without any problems.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

JNOYES88 Likes This 
Reply With Quote
Old 07-30-2011, 01:59 AM   #9
JNOYES88
Recipes 
 
Jul 2011
ROCK FALLS, IL
Posts: 64

You guys are saving my bacon... THANKS! Whats it like to be a Jedi Master of homebrewing? lol

 
Reply With Quote
Old 07-30-2011, 02:03 AM   #10
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,256
Liked 7742 Times on 5432 Posts


Quote:
Originally Posted by JNOYES88 View Post
You guys are saving my bacon... THANKS! Whats it like to be a Jedi Master of homebrewing? lol
I'll let you know if I ever meet one!
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
To carb a cyser or not? Liquisky Mead Forum 7 11-28-2011 03:55 AM
Should I carb? Fathand Mead Forum 5 12-12-2010 09:57 PM
Using cooper carb drops on a raspberry mead sagnew440 Mead Forum 1 04-22-2010 10:49 PM
when to bottle? force-carb in keg? nathan Mead Forum 5 02-02-2009 05:09 PM


Forum Jump