2 foot brew table ok? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > 2 foot brew table ok?

Reply
 
Thread Tools
Old 07-29-2011, 12:52 AM   #1
jsguitar
HBT_SUPPORTER.png
 
jsguitar's Avatar
Recipes 
 
May 2011
Overland Park, KS
Posts: 1,198
Liked 129 Times on 102 Posts



I found a stainless table that I think I'm going to buy locally. It's for my two keggle, one cooler single tier set- up. Is two feet an ok height? It's seems like it's about right. Most prep tables are 35" which is too tall for me. I'm thinking that it'll be short enough to look into the kettles without being too short for priming the pump. Thoughts?

 
Reply With Quote
Old 07-29-2011, 12:54 AM   #2
buffalobrewer
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2009
Buffalo, NY
Posts: 987
Liked 18 Times on 16 Posts


That should be a good height. Tall enough to gravity feed into a fermenter, low enough to see into.
__________________
You start with a full bag of luck and a empty bag of experience, your goal is to fill the bag of experience before you empty your bag of luck

 
Reply With Quote
Old 07-29-2011, 01:38 AM   #3
jsguitar
HBT_SUPPORTER.png
 
jsguitar's Avatar
Recipes 
 
May 2011
Overland Park, KS
Posts: 1,198
Liked 129 Times on 102 Posts


Thanks!

That's what I was hoping. Looks I'll have a new brew stand tomorrow.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stainless sink/table brew stand Spirk Brew Stands 21 07-03-2011 05:18 AM
Steam Table to Brew Stand?? bahamas Brew Stands 2 04-28-2011 07:46 PM
Best way to run beer lines about a foot from the kegerator? scrapplejoe Kegerators & Keezers 2 02-22-2011 05:05 PM
50 foot CFC ~ to a plate chiller? CharlosCarlies Chillers & Stir Plates 11 01-18-2010 09:09 PM
Brew table concept ajmartinez Brew Stands 10 12-31-2009 06:31 PM


Forum Jump