How many kegs can I fit into my kegerator? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > How many kegs can I fit into my kegerator?

Reply
 
Thread Tools
Old 07-28-2011, 03:36 PM   #1
coreyrak
Recipes 
 
Jul 2011
Bloomfield, NJ
Posts: 2


Hi everyone. I'm new to both this forum and brewing in general (3 batches and counting), so I apologize if this is well worn turf or too specific.

I just bought a commercial kegerator for a steal, and I'm wondering if I should buy a one or two keg system. It measures 25" deep. 20" wide. 35" high (from the outside. By my measurements it would definitely be a tight squeeze, and I don't want to buy the system without a good guess that it'll work.

What do you guys think?



 
Reply With Quote
Old 07-28-2011, 03:37 PM   #2
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2009
Los Angeles
Posts: 8,162
Liked 481 Times on 389 Posts


Those are the outer dimension?

You really need to get the internal dimensions to make any kind of determination, as those can vary considerably.

There is a simple technique you can use. Take a corny keg and make paper cutout templates of the top/bottom and then line them in the freezer like you were squeezing kegs in there. Keep in mind that you will also have to account for space taken up by tubing and disconnects on the kegs, and any regulators, CO2 tanks, manifolds, etc. that you will be putting in there.

 
Reply With Quote
Old 07-28-2011, 03:52 PM   #3
coreyrak
Recipes 
 
Jul 2011
Bloomfield, NJ
Posts: 2

Thanks, weirdboy.
I'll take a measurement as soon as I pick the thing up this Sunday.
Good call on the paper with the 9" diameter.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving Kegs in and out of the Kegerator? Cpt_Kirks Bottling/Kegging 6 04-13-2014 09:15 PM
# of kegs vs kegerator capacity bubbachunk Bottling/Kegging 57 03-17-2011 03:54 AM
How Many Kegs in Little Kegerator? Cpt_Kirks Bottling/Kegging 15 03-16-2011 03:43 AM
Kegerator - How many kegs? Cpt_Kirks Bottling/Kegging 9 11-11-2008 04:28 PM
Adding kegs to Kegerator EamusCatuli Bottling/Kegging 14 08-21-2008 04:15 PM


Forum Jump