Blichmann burner hard plumbing questions - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Blichmann burner hard plumbing questions

Thread Tools
Old 07-26-2011, 02:24 PM   #1
brewtime's Avatar
Apr 2009
sykesville md
Posts: 351
Liked 19 Times on 12 Posts

I got a Blichmann floor burner for Fatherís day this year My wife thought I could use it to do extract batches when if time did not allow for me to do AG. I got to thinking I could use this on my stand and if I needed to use it as a floor burner I could disconnect it from the stand and use it that way.

the problem I am running into is finding the parts I need to make the connection. I could buy this, however I do not need the all the pieces such as the mounting brackets. The hose is to long as well. Now if I could find a place where I could buy the needle valve and have a shorter length of hose made with the correct fitting I would be golden.

Any suggestions on where to look I have tried McMaster-Carr but could not find anything. All I could find for gas hose was either 1/2 or 1/4 fittings in a premade hose. The Blichmann uses 3/8 fittings.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Blichmann Burner Shepherd5 Equipment/Sanitation 32 09-12-2013 04:31 AM
Plumbing 23 Tip NG Wok Burner mjatrucker Equipment/Sanitation 1 07-20-2011 12:52 PM
Need advice on hard plumbing and pump setup... Dgonza9 Equipment/Sanitation 8 02-22-2011 04:48 PM
Hard plumbing the brew stand caspio Equipment/Sanitation 1 06-18-2009 09:30 PM
Hard or soft option - (plumbing a brew stand) chrisp Equipment/Sanitation 9 06-12-2008 08:59 PM

Forum Jump