BIAB Anyone using anything like this? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > BIAB Anyone using anything like this?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 07-23-2011, 04:14 PM   #1
Lucky3barrel
Recipes 
 
Sep 2010
Kansas
Posts: 2


I took a piece of 20 oz. copper and drilled 1/8 in. holes randomly in it. I have two brews going and I've used this on both. Before the Kansas heat took over. I have yet to get my water and heat figured out. I'm sure the burner is too big. I took it from a used forced air furnace. I use a thermostat to turn it on and off at my desired temps. I was thinking when I use it again I can use a filter and a pump. The wort is coming out very cloudy. Can anyone give me any advice regarding this?
Cheers Rich


Click image for larger version

Name:	DSCN8941.jpg
Views:	280
Size:	62.4 KB
ID:	30367  

 
Reply With Quote
Old 07-23-2011, 10:10 PM   #2
brewinsam
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Oct 2010
Oklahoma City, OK
Posts: 54
Liked 2 Times on 2 Posts


Is the copper cylinder your bag/basket?
__________________
Live in Oklahoma and want to get a home brewing permit? Send in one of these to the ABLE Commission.

 
Reply With Quote
Old 07-24-2011, 01:04 AM   #3
Lucky3barrel
Recipes 
 
Sep 2010
Kansas
Posts: 2

Yes. There is a bottom with the same holes in it.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Let me see your BIAB setup! Seabee John Equipment/Sanitation 17 04-08-2012 08:24 PM
Now that I BIAB, how do I sanitize CFC? opalko Equipment/Sanitation 4 05-04-2011 06:51 PM
If you BIAB... ScubaSteve Equipment/Sanitation 19 02-24-2010 01:54 PM
Which bag from Brewmasters warehouse for BIAB? cyberbackpacker Equipment/Sanitation 3 10-13-2009 05:47 PM
Fine Crush with BC and BIAB? magnj Equipment/Sanitation 10 09-13-2009 12:24 AM


Forum Jump