I'm selling most of my homebrewing equipment to help finance moving. I'm not completely abandoning the hobby forever, but my loss is your gain for now. I live In Albuquerque, NM and local pick-up is preferred. .If you REALLY want me to ship a keg or a cylinder, buyer pays shipping.
A custom-built wooden tap box to be placed on top of a chest freezer you store kegs in. (I just drilled holes in the top of mine and ran tubing directly from keg to shank.) It measures 60”Lx13.5””Wx16.75”H and contains 10 Perlick 425SS Forward Seal faucets
, full shank assemblies
including 1/4” 90-degree stainless steel tailpieces
, tap handles
, and faucet caps
. (The top is on hinges and just swings up. The box connects to the freezer with attached corner-brackets.)
A picture of it attached to my chest freezer
and a close up.
A picture of it being built. (I thought this provided the best view of the shanks and tailpieces.)
$600 or best offer
*chest freezer not included*
11x Ball Lock Corny Kegs with barbed gas and liquid disconnects for each. I put in new O-rings in the posts and lid when I bought them.
(They do have lids, they were just being cleaned when I took the picture.)
10lb CO2 cylinder with Primary Dual-Gauge CO2 Regulator with Cage and check valve.
10lb Oxygen cylinder with 0-8 LPM regulator, tubing, and a .5 Micron Diffusion Stone.
5x Sankey Kegs
(I bought them when a local place went out of business, but never ended up using them.)
Since my inbox is only limited to 5 messages, emailing me would me much appreciated so I don't miss anyone. My email is everval at gmail dot com