Foam!!!! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Foam!!!!
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 07-15-2011, 01:09 AM   #1
philhead1
Recipes 
 
Join Date: Jul 2008
Location: Harrodsburg, Ky.
Posts: 96
Liked 1 Times on 1 Posts


I made a Imperial blonde ale and a Belgian strong ale, both from extract kits for a 4th of July party. When I got there ppl started opening the bottles and they are foaming out the top as soon as its opened. open 2 up yesterday and still doing it. was there to much sugars left when I primed it for bottling? I didn't make a very good starter for either batch, no stir plate no airation. working on getting a good starter kit. I'm not sure what the FG was didn't write it down. they were made in jan/ feb. any clues?


__________________
WHY BEER DRINKER GO TO HEAVEN

He who drinks beer sleeps well
He who sleeps well does not sin
He who does not sin goes to heaven

 
Reply With Quote
Old 07-15-2011, 01:13 AM   #2
nefarious_1_
Recipes 
 
Join Date: Jan 2011
Location: Hudson Valley, NY
Posts: 551
Liked 3 Times on 3 Posts


There seems to be a lot of this going around lately...


How much priming sugar did you add? This could be your problem.

What was your FG and was it steady for at least 3 consecutive days before bottling? Fermentation may not have been complete when you bottled. This could be the problem.

Were you able to taste any of the beers or was there too much foam? An infection could also be your problem.



 
Reply With Quote
Old 07-16-2011, 02:09 AM   #3
philhead1
Recipes 
 
Join Date: Jul 2008
Location: Harrodsburg, Ky.
Posts: 96
Liked 1 Times on 1 Posts


I don't remember the final gravity do remember it was a lil high, thought it might have been the poor starter not able to finish the job, but I let my beers go 3-5 days inactive before bottling. some of the strong ales didn't foam as bad, some foamed slowly but consistant. all the imperials over flow within a second or 2 after popping the top. they taste fine after pouring into a 24 oz mug and left to settle down.
__________________
WHY BEER DRINKER GO TO HEAVEN

He who drinks beer sleeps well
He who sleeps well does not sin
He who does not sin goes to heaven

 
Reply With Quote
Old 07-16-2011, 02:14 AM   #4
PHillBrewCo
Recipes 
 
Join Date: Oct 2009
Location: NJ, USA
Posts: 65
Liked 1 Times on 1 Posts


No bottle bombs?
__________________
"When all else fail, inhale a Ale" - Daniel Dumile

 
Reply With Quote
Old 07-16-2011, 02:21 AM   #5
COLObrewer
Recipes 
 
Join Date: Jan 2009
Location: Pea Green, Colorado
Posts: 2,934
Liked 60 Times on 53 Posts
Likes Given: 4


Quote:
Originally Posted by philhead1 View Post
. . . . . . . but I let my beers go 3-5 days inactive before bottling. . . . .
What does this mean? You should check the gravity and then check it again in 3 days, if it is stable then it is finished. What was the total amount of time this was in the fermentor?
__________________
Newer, better, more streamlined sig as per the forum police.

 
Reply With Quote
Old 07-16-2011, 02:25 AM   #6
stratslinger
Recipes 
 
Join Date: Dec 2010
Location: Terryville, CT
Posts: 2,392
Liked 198 Times on 164 Posts
Likes Given: 125


In the future, try to remember that "poor" starters shouldn't lead beers to not finish fermenting - they typically just mean fermentation starts off a little more slowly. If the yeast start fermenting, they will finish (though sometimes need a little help if they decide to go to sleep on the job).

You said you let your beers go 3-5 days inactive - can you explain exactly what you mean by this? Do you mean that hydrometer readings were steady for 3-5 days? Or do you mean that they stopped bubbling, or the krausen dropped, and 3-5 days later you bottled?

In the future, make sure that your hydrometer readings are stead for at least 3 days before you bottle. And for the love of all that's malty and yeasty, don't do what I did on my last bottled batch and assume that your kit came with the right amount of priming sugar - make sure to measure out the appropriate amount! I too had a problem with a few bottle bombs and overcarbonated survivors, and the only thing I can think of that could have led to it was too much priming sugar (DME actually) in my kit.

 
Reply With Quote
Old 07-16-2011, 02:34 AM   #7
hopalotamus
Recipes 
 
Join Date: Jun 2010
Location: CT
Posts: 121
Liked 4 Times on 4 Posts
Likes Given: 2


how long did you chill them have had a few that if they dont chill for a few days before opening they foam left them in the fridge a week and no problem

 
Reply With Quote
Old 07-16-2011, 02:59 PM   #8
unionrdr
struggling author
HBT_LIFETIMESUPPORTER.png
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 37,914
Liked 3505 Times on 3015 Posts
Likes Given: 2601


Yeah,5-6 days in the fridge till the chill haze drops. And use a hydrometer. If you don't have one,get one. If you don't know how to read it,ask. We can help you with just about anything in here.
Having said that,I sent two bottles of the batch in my avatar to Gary at Home Brewer TV. When he opened it,& started to speak,it slowly overflowed for maybe 2 seconds. Oh sure,HE gets the 1 friggin bottle that overflows! Tells me that he must not've refrigerated them 1st.
But,follow good procedures,& you can (generally) avoid a lot of this. If they haven't reached a stable FG,& you prime & bottle,you get foam or boom...or both.
__________________
My sci-fi & home brewing books on amazon-kindle now! New additions coming!
NEW, REVISED EDITION of book one of Time Lords 2034 series now on Amazon Kindle! http://www.amazon.com/dp/B00NTA0L6G
My homebrewing book "Tippy Tippy Tappy" on Kindle! http://www.amazon.com/dp/B00PBAP6JO

 
Reply With Quote
Old 07-16-2011, 11:37 PM   #9
philhead1
Recipes 
 
Join Date: Jul 2008
Location: Harrodsburg, Ky.
Posts: 96
Liked 1 Times on 1 Posts


I always wait for my FG to become steady 3-5 depending on big beer or low alcohol beer. ferment on both was ales were 12 days. my first bottled beers were in fridge for only 2 days, after that the rest a week or more. I'll keep the longer chill in mind next time I do a higher gravity beer, they both had og's of .83 +/- 2. the priming sugar was a 5 oz packet, didn't verify to see if is was right size or not. I do wait until my FG is steady lil beers 3 days bigger beers about 4-5 before I bottle. Some foam more aggressively than other but the both have a very good head on them.


__________________
WHY BEER DRINKER GO TO HEAVEN

He who drinks beer sleeps well
He who sleeps well does not sin
He who does not sin goes to heaven

 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
30% foam BeerBottles Beginners Beer Brewing Forum 18 02-13-2011 04:19 PM
How much should star san foam? (i'm not getting any foam...) brewinginct Beginners Beer Brewing Forum 12 02-11-2011 09:19 PM
Foam hypergolic Beginners Beer Brewing Forum 15 01-12-2011 04:52 AM
Foam? ipatch Beginners Beer Brewing Forum 9 03-21-2010 04:00 PM
Foam! SMOKEU Beginners Beer Brewing Forum 9 10-15-2009 01:49 AM


Forum Jump