Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > The MaxOut Brew Station
Reply
 
Thread Tools
Old 07-13-2011, 10:53 AM   #21
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default Brew Station Modifications - Automation

Now that I have the vessels sitting over the burners itís time to start getting things fired up. To do this I need to start my automation panel build and settle on my controls. At first my plan was to just have manual switches mounted on the front of the brew station to control pumps and burners through 3 PIDís. I am not interested in a push a button and your done system just wanted semi-automation to heat and cool to desired temps and control pumps. As I looked deeper into the BCS and Brewtroller I realized I wanted more. PIDís are nice and simple but the ones that can communicate between each other are expensive and complicated to program. On top of that if you add them up they can exceed the cost of a BCS and the BCS has much more to offer with a nice interface. The Brewtroller is nice if you are looking for full automation but I wanted more of a plug and play solution with computer interface. So I ended up with a BCS-462. I had an outdoor plastic control panel left over from a gate repair I did years ago and decided to strip it out and use it to house my controls. Without a doubt sourcing all of the small electrical components was the most time consuming part of the project. You have to think out every piece and how it is going to fit. Then you have to find a source that can supply the pieces at a reasonable price. Originally I wanted my control panel to be mounted above the brew station so it could be seen and mount switches into the cover. That would have been a simple solution but I didnít like the idea of having this control panel across a 36 inch table and would have too many cables exposed. I also had a hole in the face of the table from the heat controller for the steam sink (Where the burners are). So ultimately I decided to mount the panel under the table and extend the manual controls to a custom panel that would cover the hole left by the steamer control. Here are some shots of the automation build.


Click image for larger version

Name:	I Phone 189.jpg
Views:	7916
Size:	38.9 KB
ID:	29665   Click image for larger version

Name:	I Phone 292.jpg
Views:	7894
Size:	55.0 KB
ID:	29666   Click image for larger version

Name:	IMG_4767.jpg
Views:	7906
Size:	42.6 KB
ID:	29667   Click image for larger version

Name:	IMG_4756.jpg
Views:	7902
Size:	34.2 KB
ID:	29668  
MaxOut is offline
2
People Like This 
Reply With Quote
Old 07-13-2011, 11:23 AM   #22
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default Brew Station Modifications - Automation

I also modified the temp probes purchased from Brewers Hardware and Embedded Control Concepts and covered them with fiberglass mesh and heat shrink. I highly recommend calibration of ALL probes to ensure accuracy across the entire temperature range. I found through testing that the coefficients needed to be adjusted for all probes connecting to the BCS. Almost cost me my first batch but I was trusting and testing with a known accurate thermo and had to change temp settings on the fly in the BCS while mashing and sparge. Another reason I like the BCS. March 809 with SS Chugger heads mounted and wired check. Placed pop up outlet strip over pre existing hole for wiring to pass through to top of table. More Pictures.


Click image for larger version

Name:	IMG_4758.jpg
Views:	7850
Size:	29.6 KB
ID:	29670   Click image for larger version

Name:	IMG_4779.jpg
Views:	7815
Size:	35.7 KB
ID:	29671   Click image for larger version

Name:	IMG_4780.jpg
Views:	7809
Size:	27.0 KB
ID:	29672   Click image for larger version

Name:	IMG_4787.jpg
Views:	7809
Size:	28.0 KB
ID:	29673   Click image for larger version

Name:	IMG_4788.jpg
Views:	7802
Size:	37.7 KB
ID:	29674  


Reason: missing letter
MaxOut is offline
 
Reply With Quote
Old 07-13-2011, 11:30 AM   #23
onthekeg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Posts: 1,792
Liked 78 Times on 63 Posts
Likes Given: 15

Default

That is a nice clean looking build there dude! Thats what I call an investment!
onthekeg is offline
 
Reply With Quote
Old 07-13-2011, 12:53 PM   #24
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default Brew Station Modifications - Automation - Primary

Well here’s the curve ball. The refrigerator (Primary) built into the table was a no go. The refrigeration unit is a sled type mounted to the right side of the box. Inside the box is the coil and two circulation fans. Well plugged it in and no fans, no compressor and no cooling fan on compressor. Called my boy Matt (HVAC Guru) and it was bad. New Compressor, New Compressor Fan, New Circulation Fans, Pump, Recharge and Test. About 24 Mooseheads and $350.00 in parts the primary was breathing life. This was not part of the budget and slowed things for a while. The refrigerator will hold 5ea 6.5 gallon fermenting buckets. Time to wire to BCS. I wired a box in there with 4 temp probe connections (XLR) then wired to BCS. Ran output from BCS to SSR in an outlet box and plugged compressor into outlet. This way the circulation fans run constant and I am only controlling the compressor as needed. Worked out the thermostat built into the refrigerator did the same thing and the compressor all ready has a plug wired to it. This gives me a back up to use the refrigerators thermostat simply by switching the outlet the compressor is plugged into in an emergency.

Here are a few pictures of the primary. Got three lager batches in there chilling. One week apart in schedule getting the pipeline flowing. Got a batch going into secondary today and brewing again tomorrow morning. The temp probe controlling the compressor is sitting in a glass of distilled water. The last picture is my ice machine and some new corneys I scored off Craigslist. Ice machine kicks out 350 lbs of ice in 24hrs. I’ve had this for a while as I am avid camper and fisherman. The ice machine has paid for itself several times and has helped out with cooling the wort.
Click image for larger version

Name:	DSCN7157.JPG
Views:	7792
Size:	153.5 KB
ID:	29682   Click image for larger version

Name:	DSCN7158.JPG
Views:	7778
Size:	155.3 KB
ID:	29683   Click image for larger version

Name:	DSCN7160.JPG
Views:	7772
Size:	147.1 KB
ID:	29684   Click image for larger version

Name:	IMG_4761.jpg
Views:	7704
Size:	28.6 KB
ID:	29685   Click image for larger version

Name:	I Phone 069.jpg
Views:	7735
Size:	33.8 KB
ID:	29686  

MaxOut is offline
 
Reply With Quote
Old 07-13-2011, 01:01 PM   #25
durk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: irwin, pa
Posts: 37
Default

wow. looks awesome.
durk is offline
 
Reply With Quote
Old 07-13-2011, 01:46 PM   #26
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default Brew Station Modifications - Automation - Summary

So basically I ended up with a self contained, semi automated, BCS-462 controlled, 16 foot by 3 foot by 8 foot, single tier, HERMS, gas fired HLT/heat exchanger & Boil Kettle, brew station with primary fermenter, bakers rack, secondary mash lauter tun and work surface. Here are some pictures of the MaxOut Brew Station as it sits today. (Sorry about the fuzzy photos)
As of now I have two 6 gallon lagers in primary and one in secondary. I have learned allot leading up to my first brew day and much more through the coarse of the three brews sessions since. Each brew looks better and easier as I fine tune the equipment and processes. Canít wait to taste the final product. The sample I pulled to read FG tasted SWEET!!! (Moosehead Clone) Hope it makes it to the serving keg!
Click image for larger version

Name:	IMG_4753.jpg
Views:	7825
Size:	44.8 KB
ID:	29690   Click image for larger version

Name:	IMG_4760.jpg
Views:	7798
Size:	51.1 KB
ID:	29691   Click image for larger version

Name:	IMG_4789.jpg
Views:	7789
Size:	52.7 KB
ID:	29692   Click image for larger version

Name:	IMG_4792.jpg
Views:	7767
Size:	45.9 KB
ID:	29693   Click image for larger version

Name:	IMG_4793.jpg
Views:	7790
Size:	47.8 KB
ID:	29694  

MaxOut is offline
lhd7osc Likes This 
Reply With Quote
Old 07-13-2011, 02:02 PM   #27
Layne
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: Gonzales, Louisiana
Posts: 967
Liked 19 Times on 17 Posts
Likes Given: 2

Default

Very impressive!
Layne is offline
 
Reply With Quote
Old 07-13-2011, 02:03 PM   #28
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default Serving Keg Cooler + Misc

!Using this Beverage Air serving cooler as a temporary secondary on the first batch. Soon as its ready, hook up gas, adjust temp, transfer to serving keg and liquid line to tap (canít wait). The small containers go to an instant carbonator I use to make sodas. So I can blast the beer with carbonation and sample. Included are some misc pictures of hardware Iíve acquired including 4 med grade O2 tanks with regulator and SS diffuser, MM3 1.5 Monster Mill set at .039 with 15lb hopper, scales and other stuff. This has now become a hobby and will always be a work in progress. I will be brewing tomorrow and will get some action shots.
Click image for larger version

Name:	IMG_4802.jpg
Views:	7750
Size:	39.4 KB
ID:	29695   Click image for larger version

Name:	IMG_4777.jpg
Views:	7735
Size:	47.0 KB
ID:	29696   Click image for larger version

Name:	IMG_4775.jpg
Views:	7684
Size:	32.3 KB
ID:	29697   Click image for larger version

Name:	IMG_4776.jpg
Views:	7697
Size:	32.7 KB
ID:	29699   Click image for larger version

Name:	IMG_4770.jpg
Views:	7705
Size:	38.8 KB
ID:	29700  

MaxOut is offline
 
Reply With Quote
Old 07-13-2011, 02:11 PM   #29
JetSmooth
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Baltimore, MD
Posts: 1,882
Liked 43 Times on 39 Posts
Likes Given: 10

Default

This looks like a SERIOUS setup, man. I like the color-coded rings on the hoses too.

You're in Hugesville? I grew up in Waldorf.

May need to come by and crash a brew-day the next time I visit my folks.
__________________
http://smokebubbles.wordpress.com - Brewin' and 'Quein' since last Tuesday.

Bottling the Belgian: A Photo Odyssey

Beer is the mind-killer. Beer is the little death that brings total obliteration. I will face my beer. I will permit it to pass over me and through me. And when it has gone past I will turn the inner eye to see it's path. When the beer has gone there will be nothing. Only I will remain.
JetSmooth is offline
 
Reply With Quote
Old 07-13-2011, 02:13 PM   #30
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 732
Liked 62 Times on 43 Posts
Likes Given: 2

Default The Serving Area / Grill Zone

This is where the brews are served and the other cooking takes place. Opposite end of garage.


Click image for larger version

Name:	IMG_4805.jpg
Views:	7800
Size:	40.3 KB
ID:	29702  
MaxOut is offline
2
People Like This 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My New Milling Station John Beere Other 43 07-20-2012 01:40 PM
Robotic Brew Station McCuckerson Brew Stands 3 03-29-2011 10:05 PM
Filtration Station strat_thru_marshall Other 10 08-18-2010 06:31 AM
New milling station... cyberbackpacker Other 14 08-02-2010 03:58 PM
my stir plate 1x2 station 1x3 station Opherman47 Chillers and Stir Plates 9 06-04-2010 02:55 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS