Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Sight gauge on MLT
Reply
 
Thread Tools
Old 07-11-2011, 02:21 PM   #1
spoonyluv
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
spoonyluv's Avatar
Recipes 
 
Join Date: Mar 2011
Location: San Francisco, CA
Posts: 66
Likes Given: 2

Default Sight gauge on MLT

Hi,
I'm thinking of putting a sight gauge on my keggle MLT to measure strike water and to make sparging flow control easier. Is this a good idea?

If I do go this route, any ideas on a filter or strainer for the fitting (1/2") that will help keep various particles from the sight gauge tube?

Thanks!

Spoony


spoonyluv is offline
 
Reply With Quote
Old 07-11-2011, 04:28 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,810
Liked 1335 Times on 876 Posts
Likes Given: 35

Default

I've had one on my MLT for the same purpose and I never got anything stuck in the tubing. If you wanted to add a rough strainer, I could probably come up with some ideas if you told me how you were attaching your sight to the vessel.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 07-12-2011, 01:36 PM   #3
spoonyluv
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
spoonyluv's Avatar
Recipes 
 
Join Date: Mar 2011
Location: San Francisco, CA
Posts: 66
Likes Given: 2

Default

I've got a 1/2" coupling welded half into the MLT, the outer half connects to the usual compression fitting for the sight glass, the inner half is available. Is that workable? maybe a hex nipple with a mesh screen soldered onto it?
spoonyluv is offline
 
Reply With Quote
Old 07-12-2011, 08:12 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,810
Liked 1335 Times on 876 Posts
Likes Given: 35

Default

I'd just wrap a piece of stainless screen over the open end and hold it on with a hose clamp. You can probably also do the same with those stainless lint traps.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 07-12-2011, 11:17 PM   #5
spoonyluv
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
spoonyluv's Avatar
Recipes 
 
Join Date: Mar 2011
Location: San Francisco, CA
Posts: 66
Likes Given: 2

Default

Thanks, that seems like a good simple way to go. Time to hit the hardware store.


spoonyluv is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oxyclean vs. Sight gauge? ExHempKnight Equipment/Sanitation 54 06-02-2013 07:37 PM
Sight gauge overflow Waunabeer Equipment/Sanitation 2 12-22-2010 07:13 PM
POLS $10 HLT Sight Gauge! The Pol Equipment/Sanitation 60 04-18-2009 06:49 PM
sight gauge Gumbys_Brew Equipment/Sanitation 6 02-15-2009 12:40 AM
Sight Gauge Length how tall should it be? Sumo Equipment/Sanitation 3 12-02-2008 01:02 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS