Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Finally used a keg spear for something
Reply
 
Thread Tools
Old 07-04-2011, 04:02 AM   #1
Berniep
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Greensburg IN
Posts: 164
Liked 6 Times on 6 Posts
Likes Given: 7

Default Finally used a keg spear for something

Turns out that the tube fits perfectly inside the tube that fits inside a glass carboy neck.
A few inches of delrin, a couple of o rings and a clamp.
Oh and an hour on the lathe( I am not very good at lathe work)
And I now have a fermenter that can handle 10 gallon batches.


Click image for larger version

Name:	image-314647555.jpg
Views:	742
Size:	9.7 KB
ID:	29075  
Berniep is offline
 
Reply With Quote
Old 07-04-2011, 05:23 AM   #2
Gwitz
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2010
Location: Kamloops, British Columbia
Posts: 196
Liked 2 Times on 2 Posts

Default

I just use #11 rubber bungs for my sankes, then install a spear with 3/4" cut off the tube to transfer with co2.


Gwitz is offline
 
Reply With Quote
Old 07-04-2011, 08:25 AM   #3
toolboxdiver
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Hatboro, PA
Posts: 211
Liked 2 Times on 2 Posts

Default

I use the carboy cap then the spear , think I cut a inch off mine and it works great
toolboxdiver is offline
 
Reply With Quote
Old 07-06-2011, 11:24 PM   #4
Berniep
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Greensburg IN
Posts: 164
Liked 6 Times on 6 Posts
Likes Given: 7

Default

I Had a piece of delrin and a clamp along with the O rings laying around the shop.
A bung or cap was an hour drive one way.
Plus it got me some much needed practice on the lathe. Next I have to make an adapter to transfer the wort with CO2.
I wonder what the thread pitch is for a ball lock fitting.
Berniep is offline
 
Reply With Quote
Reply


Thread Tools



Forum Jump

Newest Threads

LATEST SPONSOR DEALS