Ball Valve, Thermometer, Sight Glass location. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Ball Valve, Thermometer, Sight Glass location.

Reply
 
Thread Tools
Old 07-02-2011, 10:19 PM   #1
redrider736
HBT_SUPPORTER.png
 
redrider736's Avatar
Recipes 
 
Jun 2011
London, Ontario
Posts: 143
Liked 3 Times on 3 Posts



Just trying to figure out what is the best location to mount the above into my Keggle HLT/BK ?

I was thinking of mounting the Ball Valve center with the Keg handles, the Thermometer just above, and the Sight Glass on the same plane as the Ball Valve but 90 degrees to the left (if your facing the Keg)
I decided to go with a separate Thermometer/Sight Glass set-up. I didn't want it all in front.

Dose anyone see any issues with this, and how low should I be mounting the Ball valve ?
__________________
519 Brewing Co.
Brew Count-11
Mead Count-3


 
Reply With Quote
Old 07-02-2011, 10:42 PM   #2
TravisT
Recipes 
 
Apr 2011
denver, CO
Posts: 195
Liked 18 Times on 17 Posts


pretty good explanation from a fellow HBT member!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for a sight glass and thermometer for a keg kettle. betacrash Kettles, Mash Tuns & Hot Liquor Tanks 19 10-28-2012 06:20 PM
Keg/Kettle Sight glass & Thermometer Kit redrider736 Kettles, Mash Tuns & Hot Liquor Tanks 1 06-24-2011 03:46 AM
Kettle Ball Valve Location..?? kuips Kettles, Mash Tuns & Hot Liquor Tanks 3 07-26-2010 09:26 PM
Float ball for sight glass CorgiBrew Kettles, Mash Tuns & Hot Liquor Tanks 19 05-14-2010 02:30 PM
DIY Thermometer and Sight Glass Combination LiverDance Kettles, Mash Tuns & Hot Liquor Tanks 14 01-17-2010 08:48 PM


Forum Jump