Check out my DIY drip pan! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Check out my DIY drip pan!

Thread Tools
Old 06-29-2011, 02:52 AM   #1
Apr 2011
Charlotte, NC
Posts: 241
Liked 6 Times on 6 Posts

Completely ridiculous I know. But times are tight and I had a feeling my leaking problem could have been from the bucket I had hanging from the shank assembly.
Solution to that=find something around the house to make into a drip pan.
I do a quick glance around the walls in the manroom and there's a Budweiser tin sign. A few bends and cuts later I got a drip pan.
Still need to figure out the drainage though. Didn't have anything handy to get that far.
Any ideas on the hardware I could use for draining it???
Click image for larger version

Name:	ForumRunner_20110628_225150.jpg
Views:	607
Size:	20.3 KB
ID:	28681  

Reply With Quote
Old 06-29-2011, 03:01 AM   #2
Jan 2011
Duluth, GA
Posts: 36

My drip pan, made from a 2 dollar drywall mud holder, is attached with magnets. I just open the garage door and dump it out.

Reply With Quote
Old 07-01-2011, 01:19 AM   #3
Oct 2010
madison, wi
Posts: 27

made mine from an old license plate, much like yours. since it had holes in it already i used a dremel to extend those up (narrower, of course) and put two small screws (with heads big enough to fit through the holes), into my fridge door. easy to remove and rinse.

Reply With Quote
Old 07-01-2011, 01:43 AM   #4
rekoob's Avatar
Feb 2011
Norfolk, VA
Posts: 1,429
Liked 108 Times on 83 Posts

i also used magnets but i use the container that some LME came in... actually i have two of them on the front of the keezer under three taps. the taps are a touch to close to use three of them (i tried), really only need one and just slide it over if your using a different tap, it covers two taps pretty good. so far, working great.

Reply With Quote
Thread Tools

Forum Jump