Kettle Options - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Kettle Options

Reply
 
Thread Tools
Old 06-22-2011, 06:54 PM   #1
Runyanka
 
Runyanka's Avatar
Recipes 
 
Dec 2008
Providence Village, Texas
Posts: 1,536
Liked 20 Times on 19 Posts



So here is where I stand right now. I am saving up to make a brewstand and I'm at a crossroads. A guy is willing to plasma cut off the top of these kegs, clean them up, weld in 1/2" NPT tubes, one male and one female (for valve, and thermometer). He will charge $130 a piece for all this work, including keg. I attached a pic of the three he will be using. They are in great shape, minus the dried on grass he rolled them though

So... should i get these and basically be at $190 per kettle (with keg, work, valve, and thermometer) or save up and buy blichmann or polarware kettles? Granted the MLT will cost a little more for me because I will have to buy a false bottom.

I will also be purchasing a blichmann top tier to use these on, so will they be to tall? Any thoughts, guidance, rants, are welcome!
Click image for larger version

Name:	KeithKeg2.jpg
Views:	207
Size:	54.5 KB
ID:	28153   Click image for larger version

Name:	KeithKeg1.jpg
Views:	212
Size:	49.8 KB
ID:	28154  
__________________
Diverse Haus Brewery

 
Reply With Quote
Old 06-22-2011, 07:03 PM   #2
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


I have a converted keg I use for my BK and I would trade it in a heartbeat for a real kettle. I would go with a Polarware or Megapot. I have a 10 gal Polarware MT w/FB and it is my absolute favorite piece of brewing equipment. A 15 gal Polarware is in my future upgrade plans. I like the clad bottom on the Megapots, but I don't like the weldless valve. I would prefer a kettle a few gauges heavier than the Blichmann. Those seem very thin. I also don't like the dip tube arrangement on the Blichmanns. OTOH, converted kegs do work and they are nearly indestructible. My main objection to them are the concave bottom, the weight and the bottom skirt which retains heat long after flame out.

 
Reply With Quote
Old 06-22-2011, 07:26 PM   #3
Runyanka
 
Runyanka's Avatar
Recipes 
 
Dec 2008
Providence Village, Texas
Posts: 1,536
Liked 20 Times on 19 Posts


So is Blichmann the only one that provides welded connections for valve, thermometer, etc? I also like the welded connections, I currently have a 20g aluminum pot with a weldless valve, and it only leaked once, but once was enough.
__________________
Diverse Haus Brewery

 
Reply With Quote
Old 06-22-2011, 08:08 PM   #4
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 70 Times on 63 Posts


Quote:
Originally Posted by Deuce View Post
So is Blichmann the only one that provides welded connections for valve, thermometer, etc? I also like the welded connections, I currently have a 20g aluminum pot with a weldless valve, and it only leaked once, but once was enough.
No, the Blickmann's and the Megapots both have weldless fittings. The Polarware is available with welded ports or no ports if desired. There are other kettles available, but those are the ones I am most familiar with.

 
Reply With Quote
Old 06-22-2011, 08:28 PM   #5
hinke
Recipes 
 
Mar 2010
Cedar Park, Texas
Posts: 232
Liked 1 Times on 1 Posts


I just used my 20 gallon BoilerMakers yesterday, and all I can say is that I am glad I switched from the heavy keggles....The BoilerMakers are super nice, the false bottom is excellent and the HopBlocker seems to work great. The dip tube is nice, removable for easy cleaning. The sight class works like it should.

This is a first impression that I have of the BoilerMakers.

 
Reply With Quote
Old 06-22-2011, 08:35 PM   #6
Runyanka
 
Runyanka's Avatar
Recipes 
 
Dec 2008
Providence Village, Texas
Posts: 1,536
Liked 20 Times on 19 Posts


I guess the only thing that is holding me back on the blinkmann's is buy the time I buy two 15 gallon pots for HLT, MLT, and a 20 gallon kettle. Plus false bottom, I'm over $1,000
__________________
Diverse Haus Brewery

 
Reply With Quote
Old 06-22-2011, 08:37 PM   #7
hinke
Recipes 
 
Mar 2010
Cedar Park, Texas
Posts: 232
Liked 1 Times on 1 Posts


Yes, I have three 20 gallon BoilerMakers and paid about $1400 including false bottom and HopBlocker. Pricey, but they are nice.

 
Reply With Quote
Old 06-22-2011, 08:52 PM   #8
jww9618
 
jww9618's Avatar
Recipes 
 
Jan 2011
Little Elm, Texas
Posts: 356
Liked 6 Times on 6 Posts


I know the guy you are talking about. I bought a keg with 1 welded fitting from him and love it. He does good work. I would think about finding a few cheap kegs on CL and have him cut and weld them for you. It might save a few bucks. If you want to get together for a brew day sometime let me know, I live in Paloma Creek.

 
Reply With Quote
Old 06-22-2011, 08:57 PM   #9
Runyanka
 
Runyanka's Avatar
Recipes 
 
Dec 2008
Providence Village, Texas
Posts: 1,536
Liked 20 Times on 19 Posts


Quote:
Originally Posted by jww9618 View Post
I know the guy you are talking about. I bought a keg with 1 welded fitting from him and love it. He does good work. I would think about finding a few cheap kegs on CL and have him cut and weld them for you. It might save a few bucks. If you want to get together for a brew day sometime let me know, I live in Paloma Creek.
Awesome!
Let me know the next time you plan on brewing. Last weekend I did a 10g batch of Haus Pale Ale. So now I have 25g of fermenting beer, and SWMBO said to cool my jets
__________________
Diverse Haus Brewery

 
Reply With Quote
Old 06-23-2011, 03:43 PM   #10
jww9618
 
jww9618's Avatar
Recipes 
 
Jan 2011
Little Elm, Texas
Posts: 356
Liked 6 Times on 6 Posts


Wow that's a lot. What kind of temp control do you use?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
QD options. kmat123 Equipment/Sanitation 54 06-29-2010 07:20 PM
Any other options over stillspirits still? samljer Equipment/Sanitation 2 06-21-2010 01:38 AM
Options for new equipment? killerhertz Equipment/Sanitation 10 04-20-2008 01:24 PM
Burner options gonzo brewer Equipment/Sanitation 3 09-13-2007 04:25 AM
RPM reduction options? Brewpastor Equipment/Sanitation 16 11-09-2006 11:04 PM


Forum Jump