Still in a bind but I want to share the progress here. I've nearly completed converting my A/C into a glycol chiller, just need Fermtroller to take control, and I have built 1 of 2 fermentation chambers. I have my Fermtroller box assembled, but will probably be making a few tweaks this evening or so, right now my controls are on the valve panel, and I want to transition them to the heat outputs so I can put a higher gauge wire in contact with my 12v controlled items. Here some pics:
Fermtroller Box with 5 LED indicators for 5 zones, will only be using 3 to start.
Fermentation chamber for 2 carboys, built, but still needs wired and plumbed.
My cooling radiators, with 2 120mm 12v fans for cooling the air across the glycol cooled radiator.
Glycol A/C unit, almost wired. I was able to by-pass the digital control quite easily, but for some reason my Fermtroller won't keep the SSR on continuously like my PID does.
** Does anyone have any idea why Fermtroller won't leave my SSR on like my PID**
I have tested this with a 10a and 25a SSR, the PID works fine with either, but Fermtroller will only stay on for a few seconds then cycles off then on.