I need this gone so I'm pricing it for a quick sale....Details below
-2 PIDs (Omega brand) (one for controlling the heatstick, the other for monitoring a second temp. reading)
-Capable of firing 1 5500 watt heating element, but can easily be upgraded to control two.
-K type Thermocouplers included
-Output for 1 heating element and for 1 pump (120V)
-Panel is made of steel as shown in the pictures.
-Simple operation. PIDs are turned on/off with a flip of a switch. There is a seperate switch for turning the pump on/off
-Can be used to control a RIMS or HERMS set up. I used it as a HERMS controller and it did an excellent job! It is able to maintain temps PERFECTLY at whatever mash temp you desire
-As can be seen in the photo, there is plenty of room inside the panel to add a second SSR and heatsink for controlling another heating element for a boil kettle if desired
Control panel as shown, 2 Thermocouplers with easy disconnects, cords with plugs for the heating element and a pump.
Detailed instruction manual with original documents for the PIDs and all electric components and instructions on how it works
Hooks up to a standard 30A/240V outlet (cord attached and included)
$175 plus shipping. Thanks!