Home Brew Forums > Home Brewing Beer > Electric Brewing > Electric Boil off rate
Reply
 
Thread Tools
Old 06-08-2011, 12:13 PM   #1
BenS
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2009
Posts: 954
Liked 28 Times on 24 Posts
Likes Given: 3

Default Electric Boil off rate

Has anyone noticed a difference in boil off since converting to electric? A few months ago, I converted my BK to electric and even though I dial my PID into roughly the same amount of vigorous boil, I seem to be getting less boil off. Everything in my brewing process has stayed the same, even the location I brew in (garage). My only thought is that because my heat element is about 2.5-3 gal up from the bottom of my keggle, it's not heating the same thermal mass as my propane burner. I'm even using the same keggle, just converted it to electric. Anyone else out there noticed this happening?


BenS is offline
 
Reply With Quote
Old 06-08-2011, 12:16 PM   #2
MalFet
/bɪər nɜrd/
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
MalFet's Avatar
Recipes 
 
Join Date: May 2010
Location: NYC / Kathmandu
Posts: 8,496
Liked 1411 Times on 935 Posts
Likes Given: 677

Default

For an equivalent heat input into a system, you'll get an equivalent rate of boil-off (given equivalent environmental conditions). Electric vs. propane shouldn't really have any impact on that. Thermal mass refers to the heat capacity of the material you are trying to manipulate: i.e., the water and the pot. That hasn't changed.

It's certainly possible, though, that the appearance of your boil has changed, thus leading you to think that you are getting the same degree of vigor between your two systems.
MalFet is online now
 
Reply With Quote
Old 06-08-2011, 12:28 PM   #3
BenS
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2009
Posts: 954
Liked 28 Times on 24 Posts
Likes Given: 3

Default

Quote:
It's certainly possible, though, that the appearance of your boil has changed, thus leading you to think that you are getting the same degree of vigor between your two systems.
You are probably right, there has to be something that has changed to change my boil off as drastically as it has. It is something that I'm learning to compensate for(less pre-boil volume), I just found it interesting and was wondering if other home brewers had noticed a similar phenomenon.
BenS is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I want to make an electric MLT... Beavdowg Electric Brewing 9 09-14-2011 10:25 PM
Electric vs. Gas finger123 Electric Brewing 7 04-10-2011 03:48 PM
Electric HLT Keg drunkenmonkeybrewing Electric Brewing 7 04-05-2011 08:06 PM
Electric boil kettle instructions. Fastmetal Electric Brewing 9 03-18-2011 09:53 PM
3E Brewery going ELECTRIC!!! EuBrew Electric Brewing 17 10-28-2010 05:12 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS