how do i know my starter is ready? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > how do i know my starter is ready?

Reply
 
Thread Tools
Old 06-06-2011, 08:09 PM   #1
hiphops
Recipes 
 
Jun 2010
New York City, New York
Posts: 296
Liked 5 Times on 5 Posts



I'm brewing with my first starter. My wort is ready and has been siting in the airlocked carboy for about 6 hours now. My starter has been at it for about 20 hrs. There airlock activity in the starter, some slurry at the bottom and just a bit of krauesen.

Is this yeast ready for pitching?


__________________
Swim - bike - run - repeat
Indict - convict - affirm on appeal - repeat
Brew - bottle - drink - repeat

 
Reply With Quote
Old 06-06-2011, 08:13 PM   #2
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


This post of mine should help.

Quote:
Originally Posted by Revvy View Post
What do you mean by "start?" What activity are you believing is an indicator that a starter has or hasn't started.? I've never had a starter not start. Modern yeast just doesn't NOT WORK these days, contrary to what most new brewers may believe. If yeast can survive 40 million years preserved in amber and a beer can be brewed out of it, then why do you believe your MODERN yeast isn't doing it's job?

Most of the time the person is looking at the wrong "signs of fermentation." And ignoring what is right in front of them.

Activity in a starter really only means one thing and one thing only.

It doesn't matter one blip in your fermenter or your starter flask if the airlock bubbles or not (if you are using an airlock and not tinfoil if you are using tinfoil, you aren't getting bibbling anyway,) or if you see a krauzen. In fact starter fermentation are some of the fastest or slowest but most importantly, the most boring fermentations out there. Usually it's done withing a few hours of yeast pitch...usually overnight when we are sleeping, and the starter looks like nothing ever happened...except for the little band at the bottom. Or it can take awhile...but either way there's often no "activity" whatsoever....

I usually run my stirplate for the first 24 hours, then shut it down, if you are spinning your starter it is really hard to get a krausen to form anyway, since it's all spinning, and there's often a head of foam on it from the movement.


All that really matters is that creamy band o yeast at the bottom.





This is a chilled sample so it's flocculated, but even with an unchilled sample you should see a band of yeast at the bottom. Here's an unchilled version



Same thing, a band.

As it is I've only ever seen two or three krausens actually on my starter (one blew off a bunch of krausen and knocked the tinfoil off the flask,) and the evidence of one on the flask at the "waterline" once. But I've never not had a starter take off.

Look for the yeast at the bottom, don't worry what it looks like on top.

If you have yeast on the bottom....that's all you really need.

If it looks anything like that, your are ready to either feed it again, or use it.

And....starters were made for years before people started using stirplates, so that's not a determing factor in if a starter works or not.


__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 06-06-2011, 08:16 PM   #3
ajwillys
Recipes 
 
May 2008
Holly Springs, NC
Posts: 1,296
Liked 26 Times on 24 Posts


It seems to me if you're wort is ready, you should dump the starter in regardless if its reached high krausen or not. I generally do the chill and decant method, but in your case, I'd dump the whole thing in now.

 
Reply With Quote
Old 06-06-2011, 08:19 PM   #4
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


I've probably only caught and pitched a starter at high krausen 3 times. Most of the time the krausen has come and gone by the time I'm ready to pitch. If you are lucky enough to catch them at high krausen at pitching time that's great, but not necessary.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 06-06-2011, 08:28 PM   #5
3puttpete
Recipes 
 
Jan 2011
somewhere, sc
Posts: 6
Liked 8 Times on 3 Posts


Not to hijack, but not seen this discussed anywhere.

Logically thinking, it would seem that if there is enough O2 and nutrients, yeast will propagate exponentially until the environment becomes less than optimal.

So, with that line of (clearly incorrect) thinking, it would seem that if you pitched 1 billion yeast cells, that they would propagate to an optimal number in slightly more time than if you pitched 5 billion cells.

So, as I know that somewhere my "logical thoughts" are not correct, can someone please explain this to me.

This comes after underpitching a HG stout and only fermenting down to 1.03.

Thanks

 
Reply With Quote
Old 06-06-2011, 10:48 PM   #6
enohcs
Recipes 
 
Jan 2008
Washington, DC
Posts: 444
Liked 31 Times on 10 Posts


Quote:
Originally Posted by hiphops View Post
I'm brewing with my first starter. My wort is ready and has been siting in the airlocked carboy for about 6 hours now. My starter has been at it for about 20 hrs. There airlock activity in the starter, some slurry at the bottom and just a bit of krauesen.

Is this yeast ready for pitching?
One thing I read that you may want to look into, you don't want to use an airlock in your starter. Unlike fermenting beer, you want a supply of oxygen in your starter. I don't pretend to understand the science behind it, but it seems to be the concensus for starters.

Also, I just did a starter myself and posted a video today on this thread: http://www.homebrewtalk.com/f163/yea...-video-249831/

Fermentation started and finished in less than a day.
__________________
Matt

 
Reply With Quote
Old 06-07-2011, 01:30 AM   #7
EROK
Recipes 
 
Jun 2011
Ingleside, IL
Posts: 207
Liked 8 Times on 6 Posts


Pitch that starter man! 20 hours is good enough. As long as you are pitching the entire thing then pitch now. If you are waiting to let it ferment out, then you should have started the yeast starter two days from brew day, giving it 24 hours to build, then chill overnight, decant and pitch just the slurry.
__________________
EZ BREWING CO. - No Stress -- Just Do Your Best !



Chuck Norris is the only person to ever beat Andre the Giant in a drinking contest. And he did it by a two case margin.


 
Reply With Quote
Old 06-07-2011, 04:22 AM   #8
HopHead24
Recipes 
 
Dec 2009
Brooklyn Park, MN
Posts: 195
Liked 3 Times on 3 Posts


This was very helpful. Boiling my 2L flask as we speak, sterilized my foam stopper in a microwave bag. Will let cool overnight and pitch the yeast tomorrow. This will be my first 2 stage starter for brewing on Friday. Brewing a Burton Ale w/OG of 1080. Need lots of yeasties.
__________________
Bad Ass Brewery

Primary 1 & 2: Burton Ale until 12/6/12

 
Reply With Quote
Old 06-07-2011, 12:39 PM   #9
wyzazz
Recipes 
 
Aug 2009
Atwater, OH
Posts: 4,297
Liked 52 Times on 49 Posts


The growth phase in a typical starter is done within 18 hours, that's really what the starter is for, to grow the yeast to the proper numbers. If you're pitching the whole starter then go for it!


__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)

 
Reply With Quote
Reply
Thread Tools



Forum Jump