Help With Mashtun..Need SS valve - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Help With Mashtun..Need SS valve

Reply
 
Thread Tools
Old 06-02-2011, 06:32 PM   #1
marmonduke
Recipes 
 
May 2011
Gardner, Kansas
Posts: 70


Hey everyone,

I have a 36qt (I think) coleman xtreme that I currently have vinyl tuning and braid SS setup until I can locate a SS ball valve/bulkhead. the cooler is like this one:

http://www.google.com/products/catal...d=0CDAQ8gIwAg#

I need something like this that will pass through the cooler wall where I can attach either SS braid or copper manifold:

http://www.amazon.com/Weldless-Stain...3&sr=1-3-spell

I'm hoping someone can help me out..thanks

 
Reply With Quote
Old 06-02-2011, 06:33 PM   #2
BendBrewer
Recipes 
 
Jan 2010
Bend, Oregon
Posts: 3,134
Liked 77 Times on 59 Posts


What's wrong with that one?
__________________
CarPort Brewery
JCMAC Farms Garden

 
Reply With Quote
Old 06-02-2011, 06:41 PM   #3
marmonduke
Recipes 
 
May 2011
Gardner, Kansas
Posts: 70

my first AG batch and only one so far tastes like rubber. I have another post going about that. I also don't like the whole idea off possibly leaching some pastic from the vinyl (PVC). Here is my post about the rubbery AG batch which this may or maynot be the cause:

http://www.homebrewtalk.com/f39/firs...roblem-249106/

thanks again!

 
Reply With Quote
Old 06-02-2011, 06:42 PM   #4
BendBrewer
Recipes 
 
Jan 2010
Bend, Oregon
Posts: 3,134
Liked 77 Times on 59 Posts


No, what's wrong with that ball valve that you posted?
__________________
CarPort Brewery
JCMAC Farms Garden

 
Reply With Quote
Old 06-02-2011, 06:42 PM   #5
marmonduke
Recipes 
 
May 2011
Gardner, Kansas
Posts: 70

Quote:
Originally Posted by BendBrewer View Post
What's wrong with that one?
I don't know if that will be big enough or what else I may need to buy to make it work. I think the walls are 2" think?

 
Reply With Quote
Old 06-02-2011, 06:46 PM   #6
camiller
Recipes 
 
Apr 2007
Omaha, NE
Posts: 1,901
Liked 32 Times on 32 Posts


try http://www.bargainfittings.com/index...&product_id=85

then in the option box add the valve and nipple of your choice. change the inside fitting to a nipple (also in the option box) and your good to go.

 
Reply With Quote
Old 06-02-2011, 06:48 PM   #7
camiller
Recipes 
 
Apr 2007
Omaha, NE
Posts: 1,901
Liked 32 Times on 32 Posts


Quote:
Originally Posted by marmonduke View Post
I don't know if that will be big enough or what else I may need to buy to make it work. I think the walls are 2" think?
2" thick at the point the valve would go through? Are you going where the existing drain hole is or making a new hole?

 
Reply With Quote
Old 06-02-2011, 06:49 PM   #8
marmonduke
Recipes 
 
May 2011
Gardner, Kansas
Posts: 70

Quote:
Originally Posted by camiller View Post
2" thick at the point the valve would go through? Are you going where the existing drain hole is or making a new hole?
Maybe not, I'll check it when I get home..but I guess you're right because I think it does thin out there by the drain. Thank you very much BTW!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spunding valve with Tire valve to test pressure Bugaboo Fermenters 6 08-03-2011 08:55 PM
Pressure relief valve - schrader valve? timbudtwo Kegerators & Keezers 2 05-05-2011 03:35 PM
Opinions On Ball Valve, Gate Valve, Or Globe Valve For March Pumps jcav Brew Stands 13 10-16-2010 03:56 AM
Using Sanke valve as port for drain valve on MLT GC89 Kettles, Mash Tuns & Hot Liquor Tanks 10 07-17-2009 02:49 PM
Mashtun ball valve size.... rsmith179 Kettles, Mash Tuns & Hot Liquor Tanks 6 02-28-2009 09:23 PM


Forum Jump