3/8" Quick Disconnect - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > 3/8" Quick Disconnect

Reply
 
Thread Tools
Old 05-27-2011, 01:04 PM   #1
swanwick
Recipes 
 
Mar 2010
DC
Posts: 89



First of all thanks for the help on the keezer collar. I have it built and lid attached via hinge. Just need to sand, stain, uerethane, and silicone onto freezer base. Will post pics when done.

I bought my keggles from craigslist and for some reason they have 3/8" NPT rather than the standard 1/2" NPT. I am contemplating moving towards RIMS or HERMS and wanted to get my quick disconnects in order first. Can't seem to figure out best way to make it work given my 3/8" constraint.

Any help is really appreciated.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick Disconnect Question thenatibrewer Kettles, Mash Tuns & Hot Liquor Tanks 23 07-09-2011 04:41 AM
Quick Disconnect question Runyanka Kettles, Mash Tuns & Hot Liquor Tanks 4 12-27-2010 04:17 PM
3/8" Ball Valve to 1/2" Quick disconnect?? Pleepleus Kettles, Mash Tuns & Hot Liquor Tanks 5 07-01-2010 05:39 PM
MoreBeer SS Quick Disconnect Substitute chispas Brew Stands 8 07-15-2009 01:10 PM
co2 quick disconnect? nathan Kegerators & Keezers 1 01-18-2009 12:27 AM


Forum Jump