Oxygen regulator - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Oxygen regulator

Thread Tools
Old 05-23-2011, 01:04 AM   #1
Maltose's Avatar
May 2010
Frederick, MD
Posts: 471
Liked 2 Times on 2 Posts

I just bought this threaded diffusion stone from MoreBeer:

And I have a disposable oxygen tank with this regulator:

The inlet for my threaded stone looks to be 3/8" or 1/2" un barbed, and my oxygen regulator has a 3/16" barb. What is the best way to attach a hose between the two? Is there another regulator out there that has a removable barb to put a bigger one on?

Also, is there any disposable tank regulators that has a LPM gauge, or does anyone know what LPM these regulators run at?

Reply With Quote
Old 05-23-2011, 04:24 AM   #2
Jan 2011
oakland, california
Posts: 3,294
Liked 161 Times on 151 Posts

i just went through this ordeal. my solution was a union reducer (in whatever size you need) from Grainger or ebay i also did away with the disposable canister and bought an 20 cubic foot oxygen tank and regulator from harbor freight. i got the wand from morebeer with the stone on the end. it took a lot of back and forth to the store for hoses, reducers etc but it works great now. i didn't want to be guessing how much gas was left in those little canisters or have to dispose of them, i figure 20 cubic ft should last a good long while.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is there an oxygen regulator that will fit my Bernzomatic tank? jetmac Equipment/Sanitation 7 02-05-2011 08:45 PM
WTB Oxygen Regulator tdiowa Equipment/Sanitation 0 11-11-2010 07:07 PM
oxygen regulator is whistling stevecaaster Equipment/Sanitation 8 03-24-2008 10:34 AM
Oxygen Regulator Hopper31 Equipment/Sanitation 12 10-16-2007 09:21 PM
Oxygen Regulator drost Equipment/Sanitation 4 05-25-2006 03:07 AM

Forum Jump