Not just stuck, WAY stuck - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Extract Brewing > Not just stuck, WAY stuck
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 05-22-2011, 12:07 AM   #1
Garlic_Mash
Recipes 
 
Apr 2011
Gilroy, Ca
Posts: 21
Liked 1 Times on 1 Posts



I've tried everything. I waited, I roused, I warmed, I repitched (with a 2L starter of champagne yeast, which I had aerated thoroughly)

After none of that changed the SG as much as two points, I added some amylase.

... and that didn't do anything either. There it sits, at 1.030. If it had fingers, I'm sure the middle one would be raised in my direction. So...

I made a 1L starter (aerated vigorously) with nottingham, let that sit for a day, pulled .5 gal off the brew and put that together with the starter. I let that sit for a day, pulled 1 gallon off the brew and put that with what I put with the starter.

I'm keeping the lot at ~70, but it doesn't seem to be doing... anything.

For the record: the kit is the 'rogue blackened brutal bitter' from MB and my hydrometer was a lying robot (I did add 1/4 pound of peated malt to the steeping grains*) when I tried to get an OG. It was telling me .091 and that's just wildly off, given the taste of the sample.

The yeast was SP 4, kicked off in under 12 hours and was nicely active; but didn't blow foam like it would have, had the gravity actually been that high.

This is annoying me a lot more than it should, but I don't want to give up any more than I want to drink this stuff at a FG of .03.

Suggestions?

*sigh*


__________________
"It's my estimation that every man ever got a statue made of him was one kind of sommbitch or another."
-Mal
"Boy, it sure would be nice if we had some grenades, don't you think?"
-Jayne

 
Reply With Quote
Old 05-22-2011, 12:36 AM   #2
Boleslaus
Recipes 
 
Aug 2010
Atlanta, Georgia
Posts: 1,282
Liked 22 Times on 22 Posts


Have you recalibrated your hydrometer. If it was crazy high for the OG wouldn't it be giving you incorrect numbers now.


__________________
Watch me leap through this hoop!

Brewing PM for 5 years
Finally upgrading to AG in 2016!

 
Reply With Quote
Old 05-22-2011, 06:33 AM   #3
Garlic_Mash
Recipes 
 
Apr 2011
Gilroy, Ca
Posts: 21
Liked 1 Times on 1 Posts


"Have you recalibrated your hydrometer. "

Well, no, I got another one, they agree on the SG now, which leaves me not knowing what to OG really was. I'm thinking suspended proteins in the wort threw off the OG reading. There were visible 'flakes' of stuff in the sample flask, but the reading didn't change when I let it sit till they settled out, which makes me think there was a concentration of 'stuff' toward the bottom of the kettle when I was pouring into primary.

I use hops bags when the hops bill is this big, and strain the wort across a folded grain bag regardless, but stuff gets through.
__________________
"It's my estimation that every man ever got a statue made of him was one kind of sommbitch or another."
-Mal
"Boy, it sure would be nice if we had some grenades, don't you think?"
-Jayne

 
Reply With Quote
Old 05-22-2011, 12:08 PM   #4
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
 
wilserbrewer's Avatar
Recipes 
 
May 2007
Jersey Shore, Jersey
Posts: 9,213
Liked 1247 Times on 955 Posts


Did you add any water after the boil, or was this a full boil? If it was a full boil, I would have to think SG would be uniform throughout the kettle, top or bottom?

 
Reply With Quote
Old 05-22-2011, 12:57 PM   #5
Captain Damage
Recipes 
 
Apr 2008
Lowell, Massachusetts
Posts: 1,231
Liked 83 Times on 71 Posts


On a recent BrewStrong podcast, Jamil said he feels using champagne or other wine yeasts to restart a stuck fermentation is misguided. Fruit juices and wine musts are made up entirely of simple sugars. Beer wort is a combination of simple and more complex sugars. When a beer fermentation gets stuck, what's happening is that the yeast is eating all the simple sugars and then stopping. Adding champagne or wine yeast at this point, is just putting yeast in a solution with nothing to eat.

He therefore recommends repitching with another strain of beer yeast.
__________________
Stop using so much caramel malt. Your beer will thank you.
(yes, Carapils is a caramel malt...so is Special B)

FERMENTING

BOTTLED
pujwI HIq Mild Ale
KPA Khitomer Pale Ale


 
Reply With Quote
Old 05-22-2011, 01:20 PM   #6
mcaple1
Registered User
Recipes 
 
Apr 2011
Falcon, CO
Posts: 888
Liked 14 Times on 14 Posts


Don't let the Cantillon brewery know your up to this, they are firm believers that only true lambics can be made using the wild yeasts in Belgium...but since you are more brave than I am at pursuing this endeavor, I say keep it up.

 
Reply With Quote
Old 05-22-2011, 03:36 PM   #7
Boleslaus
Recipes 
 
Aug 2010
Atlanta, Georgia
Posts: 1,282
Liked 22 Times on 22 Posts


I don't know what to tell you. We need some more advanced help. It seems like something you did should have resulted in SOME lowering of the gravity.
__________________
Watch me leap through this hoop!

Brewing PM for 5 years
Finally upgrading to AG in 2016!

 
Reply With Quote
Old 05-22-2011, 06:13 PM   #8
Garlic_Mash
Recipes 
 
Apr 2011
Gilroy, Ca
Posts: 21
Liked 1 Times on 1 Posts


Quote:
Originally Posted by wilserbrewer View Post
Did you add any water after the boil, or was this a full boil? If it was a full boil, I would have to think SG would be uniform throughout the kettle, top or bottom?
It was a full boil, I have an 8 gallon pot and burner. The proteins would have gravitated toward the bottom of the kettle, however, and I did use the last bit of that for the sample. Bad move on my part, I accept that.

Quote:
Originally Posted by Captain Damage View Post
On a recent BrewStrong podcast, Jamil said he feels using champagne or other wine yeasts to restart a stuck fermentation is misguided. Fruit juices and wine musts are made up entirely of simple sugars. Beer wort is a combination of simple and more complex sugars. When a beer fermentation gets stuck, what's happening is that the yeast is eating all the simple sugars and then stopping. Adding champagne or wine yeast at this point, is just putting yeast in a solution with nothing to eat.
I get that, but adding the amylase should have reduced the unfermentables, no?

Quote:
Originally Posted by Captain Damage View Post
He therefore recommends repitching with another strain of beer yeast.
Hence the Nottingham, but it does not appear to be helping. I'll rack the rest of the brew onto the gallon-plus anyway, just to see what happens, but I think the answer is going to be 'precious d*** little'.

Mind you, it's taken 5+ weeks to try all this; I did the bits and waited two days or so after each step, to make sure I gave them a chance to, y'know, work.

I don't get it.
__________________
"It's my estimation that every man ever got a statue made of him was one kind of sommbitch or another."
-Mal
"Boy, it sure would be nice if we had some grenades, don't you think?"
-Jayne

Reason: Clarifying the wort... question

 
Reply With Quote
Old 05-22-2011, 08:14 PM   #9
Calder
Recipes 
 
Mar 2010
Ohio
Posts: 7,527
Liked 604 Times on 528 Posts


Fill your hydrometer jar with water and check your hydrometers that way. Should be close to 1.000.

Agree your initial reading was probably wrong, since the kit lists 1.062/1.064.

What temperature did you mash at. You might have created a lot of unfermentable sugars.

 
Reply With Quote
Old 05-22-2011, 08:21 PM   #10
Garlic_Mash
Recipes 
 
Apr 2011
Gilroy, Ca
Posts: 21
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Calder View Post
Fill your hydrometer jar with water and check your hydrometers that way. Should be close to 1.000.
It's almost spot-on with my RO filter water.

Quote:
Originally Posted by Calder View Post
What temperature did you mash at. You might have created a lot of unfermentable sugars.
I was 'supposed' to steep at 170, for up to 30 minutes, but I took it to 150 for an hour, then to 170 for another 30 minutes. My thinking was; instead of just steeping some of the flavourings out of the grain, I'd try to get a reasonable conversion of some of the starches as well. Then again, I only added 4 oz of peated malt and the steeping grains are mostly munich and crystal.

But; even if that is a recipe for a lot of unfermentable starches; (is that a recipe for a lot of unfermentable starches?) why didn't the amylase touch any of them?


__________________
"It's my estimation that every man ever got a statue made of him was one kind of sommbitch or another."
-Mal
"Boy, it sure would be nice if we had some grenades, don't you think?"
-Jayne

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
FG stuck at 0.020 with extract?? danlad Extract Brewing 4 01-15-2010 07:38 PM
Blow over and still stuck at 1.020 95747brewer Extract Brewing 6 12-23-2009 02:30 PM
Stuck at 1.020! MBetz Extract Brewing 4 04-29-2009 04:40 PM
Stuck fermentation..... ba70665 Extract Brewing 7 04-01-2009 04:41 AM
Am I stuck? Chimney Extract Brewing 12 08-29-2008 02:13 AM


Forum Jump