Home Brew Forums > Home Brewing Beer > Bottling/Kegging > We no need no stinking beer gun...
Reply
 
Thread Tools
Old 03-26-2012, 01:44 AM   #761
Adeering
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Sherwood, Arkansas
Posts: 685
Liked 47 Times on 39 Posts
Likes Given: 4

Default

Quote:
Originally Posted by paparker21 View Post
Did this for the first time last night with pretty good success. Seems like I always had a little bit of foam at the start when the wand is initially empty. I also had trouble finding a pressure that worked well.
I found that i had a little better success with a slightly higher pressure than what most say on here. I started around 3-5psi but seemed like i was losing some carb, 7-8 psi works real well for me, i set it wrong once at 10 and that was way too much. I also have about 7 ft of beerline before my picnic tap and im using a bottling wand i modified.


__________________
Primary: None
Secondary: None
Bottle Conditioning/Carbonating: Apple Pie
Kegged: None :(
Bottled: None
Next Brews: Pumpkin Ale, Unknown
Adeering is offline
 
Reply With Quote
Old 03-26-2012, 05:06 PM   #762
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

Wondering how well this would work on a keg carbed at room temp. I have a chilled tap system (an old cornelius President) so my kegs are sitting at room temp rather than in a refrigerator. Consequently I have to have them sitting at 28 - 30 psi to get carbed up.

Would I do the same thing as far as dropping the pressure to 5 psi and filling the bottles then take it back up to put it back on line.


__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-28-2012, 12:31 AM   #763
paparker21
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Nasvhille, TN
Posts: 196
Liked 3 Times on 3 Posts
Likes Given: 5

Default

Spok, that sounds correct. If you stay at 30 psi you'll have a beer pressure washer instead of a bottle filler! Your beer doesn't instantly decarb so you don't have to worry about the little time spent at low pressure. You may need to be concerned about room tempt though- cold beer foams less.
paparker21 is offline
 
Reply With Quote
Old 03-28-2012, 03:36 AM   #764
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

It comes out the tap at close to 32 F because of the chiller. I think the long small diameter cooling coils help keep the foaming down too. In fact I wouldn't mind a little more head on the pour.
Click image for larger version

Name:	photo.jpg
Views:	467
Size:	72.0 KB
ID:	54563  
__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-28-2012, 04:25 PM   #765
paparker21
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Nasvhille, TN
Posts: 196
Liked 3 Times on 3 Posts
Likes Given: 5

Default

I didn't think you'd still go through your chiller coil with this beer gun.... If you'll still be bottling cold beer, you should be a OK.
paparker21 is offline
 
Reply With Quote
Old 03-28-2012, 04:57 PM   #766
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

I rinsed and sanitized a little 10 oz plastic juice bottle and tried filling that straight from the tap, got about 2 inches of foam so I let the foam overflow a little then screwed the cap on tight. (wanted to take a small sample to a fellow brewer to taste) The foam settled down in a few hours leaving an inch and a half of head space in the bottle. When we poured it into glasses, got a nice head and was still carbed pretty good.

I might have to come up some tubing that will fit on/in those faucets and fill from the bottom up to see if that gets better results.
__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-28-2012, 05:09 PM   #767
H-ost
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Bellevue, WA
Posts: 1,753
Liked 53 Times on 52 Posts
Likes Given: 108

Default

Quote:
Originally Posted by spokaniac View Post
I rinsed and sanitized a little 10 oz plastic juice bottle and tried filling that straight from the tap, got about 2 inches of foam so I let the foam overflow a little then screwed the cap on tight. (wanted to take a small sample to a fellow brewer to taste) The foam settled down in a few hours leaving an inch and a half of head space in the bottle. When we poured it into glasses, got a nice head and was still carbed pretty good.

I might have to come up some tubing that will fit on/in those faucets and fill from the bottom up to see if that gets better results.
Do you not have a bottling wand?
H-ost is offline
 
Reply With Quote
Old 03-28-2012, 05:28 PM   #768
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

I do, just need to find the right size tubing to adapt it to those faucets. Their ID is bigger than a picnic tap and the angle they come out at would result in spilling beer even if it did fit right in.
__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-28-2012, 08:28 PM   #769
Prymal
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: West Richland, Washington
Posts: 449
Liked 9 Times on 6 Posts
Likes Given: 1

Default

Quote:
Originally Posted by spokaniac View Post
I do, just need to find the right size tubing to adapt it to those faucets. Their ID is bigger than a picnic tap and the angle they come out at would result in spilling beer even if it did fit right in.
I know it probably obvious but, make sure to sanatize the faucet before filling, if you plan on storing the beer for any length of time. Lots of nasty stuff can live on the end of those taps.

Also I would love to see a picture of the counter top chiller setup you are talking about. I have seen you mention it in a few other threads.
__________________
Desert Basin Brewery
Future Brews: Brett Belgian Tripel
Fermenting:
Kegged: A Porter is Born, Night Rye-Der
Gallons Brewed 2014: 110
Gallons Brewed 2013: 115
Prymal is offline
 
Reply With Quote
Old 03-28-2012, 08:50 PM   #770
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

Here is the chiller. scoured the interwebs for info on it and could not find anything. Then gave up and called Cornelius and they scanned and emailed me the manual on it. Said it was obsoleted in the early '70s. Still works great though (knock on wood)


Click image for larger version

Name:	Photo0071.jpg
Views:	451
Size:	35.5 KB
ID:	54613  
__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Never dump your beer!!! Patience IS a virtue!!! Time heals all things, even beer! Revvy Beginners Beer Brewing Forum 541 08-26-2015 06:09 PM
Beer Gun? We LOVE the Stinking Beer Gun! Evan! Equipment/Sanitation 31 11-30-2009 02:20 AM
For Sale - Beer in Hell: original painting of demons and sinners brewing beer! aflyershckyfan For Sale 7 06-06-2009 03:50 AM
Stinking cider's got me worried Reddy Cider Forum 5 02-28-2008 10:22 PM
HELP with this Stinking Computer! RichBrewer General Chit Chat 8 09-16-2007 05:36 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS