Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Brewstand Coming Together, Propane Help
Reply
 
Thread Tools
Old 05-20-2011, 03:37 PM   #1
lee_smn
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: San Diego, California
Posts: 64
Default Brewstand Coming Together, Propane Help

I just finished the frame of my three tier brew stand. It's going to have 2 burners (hlt and bk).

I was planning on getting these burners.

http://www.amazon.com/Bayou-Classic-BG10-Cast-Iron-Replacement/dp/B0009JXYSW/ref=sr_1_8?ie=UTF8&qid=1305904631&sr=8-8[/URL]

They seem like the best value, with high BTU's. I am kind of worried about them being enough for 10gal batches, and that the flame, not being wide enough, might hurt the ss kettle i just got.

I'm planning on running the regulator off the tank into black iron and having a tee/elbow with needle valve go off to each burner.

I'm kind of stuck from there, should I use soft copper with compression fittings, find somewhere to buy high pressure propane tubing (hd doesn't have), or use the .5 psi yellow gas line that I see others using, but know it isn't rated high enough, or should i just hard plumb straight into the burner, which i'm afraid to do in case my hardware changes?

Or is there another option?

Also for what/where are the jets/orifices needed?

Any advice would be appreciated, i've looked through threads for days and still am not satisfied.


Click image for larger version

Name:	CIMG0008.jpg
Views:	476
Size:	40.9 KB
ID:	26250  
lee_smn is offline
 
Reply With Quote
Old 05-20-2011, 03:53 PM   #2
RoadKing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2005
Location: Bayville, N.J.
Posts: 455
Liked 16 Times on 14 Posts
Likes Given: 1

Default

Those Are definitley enough for 10 gallon batches.( I just retired 3 of them).
The problem with them is they are LOUD and kind of inefficent.
I think one of theese would be a better choice. http://www.agrisupply.com/bg-high-pr...94/cn/5400000/ or http://www.agrisupply.com/burner-cas...82/cn/5400001/. You will probably want to hard plumb them to a ball valve (1 each)
then reduce to 3/8" copper. A flare fitting is a better choice than compression fittings.


RoadKing is offline
 
Reply With Quote
Old 05-20-2011, 05:10 PM   #3
EarthBound
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Beer Capital of the World
Posts: 1,082
Liked 11 Times on 10 Posts
Likes Given: 88

Default

Quote:
Originally Posted by lee_smn View Post
I just finished the frame of my three tier brew stand. It's going to have 2 burners (hlt and bk).

I was planning on getting these burners.

http://www.amazon.com/Bayou-Classic-BG10-Cast-Iron-Replacement/dp/B0009JXYSW/ref=sr_1_8?ie=UTF8&qid=1305904631&sr=8-8[/URL]

They seem like the best value, with high BTU's. I am kind of worried about them being enough for 10gal batches, and that the flame, not being wide enough, might hurt the ss kettle i just got.

I'm planning on running the regulator off the tank into black iron and having a tee/elbow with needle valve go off to each burner.

I'm kind of stuck from there, should I use soft copper with compression fittings, find somewhere to buy high pressure propane tubing (hd doesn't have), or use the .5 psi yellow gas line that I see others using, but know it isn't rated high enough, or should i just hard plumb straight into the burner, which i'm afraid to do in case my hardware changes?

Or is there another option?

Also for what/where are the jets/orifices needed?

Any advice would be appreciated, i've looked through threads for days and still am not satisfied.
I use those burners and they work just fine for 10 gallon batches, for sure. However, a heat stick helps speed up the process.

Use compression fittings with copper tubing. That's what I did. Easy as hell and absolutely no leaks. Check out my brewstand thread in my sig.
__________________
"You can do anything you set your mind to when you have vision, determination, and an endless supply of beer."
EarthBound is offline
 
Reply With Quote
Old 05-20-2011, 09:20 PM   #4
lee_smn
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: San Diego, California
Posts: 64
Default

that is a good price on that bg14, might make it hard to pass up.

i think ill go with the compression fittings.

so from the burner it will be jet-compression fitting-copper tubing-compression fitting-pipe/valve?

sound right?
lee_smn is offline
 
Reply With Quote
Old 05-24-2011, 12:01 AM   #5
lee_smn
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: San Diego, California
Posts: 64
Default

Thanks for the responses and advice guys.

I ended up ordering the similar bg10 like burners on agrisupply.

I changed my mind about the compression fittings, hd doesn't recommend them, not that i really care, but flares do seem more durable and i like the excuse to get a new tool.

My neighbor is an hvac guy, he told me not to get ball valves he said, with gas, ball valves have little control on flow and are best for shut-off valves. He recommended a certain type of needle valve who's name is escaping right now.

So now i'm eagerly awaiting the burners to ship and then I will get the rest of the fittings and post some pics of the progress and first brew day.
lee_smn is offline
 
Reply With Quote
Old 05-24-2011, 02:52 AM   #6
fuzzybee
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Marietta, GA
Posts: 305
Liked 4 Times on 4 Posts

Default

I use these hoses: http://tweetys.com/high-pressure-gas-hoses.aspx
3/8" female flare x 3/8" MPT


fuzzybee is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Brewstand (thanks Pol!) CollinsBrew Brew Stands 7 03-11-2015 03:56 AM
Need help with brewstand propane setup... reddskinnfan Brew Stands 5 08-06-2010 05:12 AM
Another new brewstand.. Ridemywideglide Brew Stands 5 02-13-2010 04:15 PM
Need help mounting propane plumbing for Brewstand Dustin_J Brew Stands 5 02-21-2009 08:47 PM
My brewstand build tbulger Brew Stands 23 05-07-2008 04:48 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS