NB Black IPA Questions - Yeast Starter or no? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > NB Black IPA Questions - Yeast Starter or no?

Reply
 
Thread Tools
Old 05-13-2011, 03:21 AM   #1
redshift
Recipes 
 
Apr 2011
St. Louis, MO
Posts: 26
Liked 1 Times on 1 Posts



First, I'm relaxed, and I've got a home brew.

OK, so I've chosen my 3rd kit and ordered and received my Northern Brewer Black IPA kit, but I'm hoping you guys can clarify a couple of points for me - Brewing this Saturday afternoon. Let me start with I chose the liquid option and I got a Wyeast American Ale II smack pack.

So the first point of confusion is that they recommend "2 stage fermentation and yeast starter" in the product description. 2 stage no problem, but yeast starter? I've read about 300 pages on the topic and don't see why I'd have any problems making one - the question is should I? The directions sheet from NB don't say a thing about it (yet their website does). The Wyeast pack says direct pitch. <sigh> This is where I need advice... I'm leaning towards making the starter just 'cause.

Last question, in the sheet, it mentions 1lb corn sugar late addition (0 min). Do I do this before (flame out), after, or as I'm cooling to pitching temperatures?

 
Reply With Quote
Old 05-13-2011, 03:33 AM   #2
alenub
Junior Member
HBT_LIFETIMESUPPORTER.png
 
alenub's Avatar
Recipes 
 
Apr 2011
Melbourne, Victoria
Posts: 53
Liked 3 Times on 3 Posts


Kits always tailor their instructions for those who read their instructions -- which means they are assuming you will be using their provided kit yeast. Pitch the Wyeast right in and you'll be fine.

What exactly does it say about the late addition fermentable?

 
Reply With Quote
Old 05-13-2011, 03:40 AM   #3
redshift
Recipes 
 
Apr 2011
St. Louis, MO
Posts: 26
Liked 1 Times on 1 Posts


In the Procedure section it says absolutely nothing. In the kit inventory, it says "1lb Corn Sugar late addition (0 min)". The kit inventory/instructions can be found here:

http://www.northernbrewer.com/docume...s/BlackIPA.pdf

 
Reply With Quote
Old 05-13-2011, 06:16 AM   #4
alenub
Junior Member
HBT_LIFETIMESUPPORTER.png
 
alenub's Avatar
Recipes 
 
Apr 2011
Melbourne, Victoria
Posts: 53
Liked 3 Times on 3 Posts


In the procedure, at the end of step 5 it tells you what to do with the corn sugar.

 
Reply With Quote
Old 05-13-2011, 06:25 AM   #5
teddy4xp
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2010
Traverse city, Michigan
Posts: 391
Liked 9 Times on 8 Posts


Play it safe.....ALWAYS make a starter

 
Reply With Quote
Old 05-13-2011, 12:15 PM   #6
Seven
Recipes 
 
Jan 2011
Pittsburgh, PA
Posts: 1,538
Liked 168 Times on 80 Posts


Mr Malty says without a starter you would need 270 billion yeast cells, or 2.8 packets of liquid yeast for this beer. So yes, I would make a starter.

If you are brewing Saturday, the starter should have been made on Tuesday or Wednesday to give the yeast enough time to reproduce sufficiently. Making it a few days earlier will also give you time to cold-crash and decant the spent wort from the starter - if you are one who likes to decant before pitching. I would still make the starter ASAP to get the yeast reproducing then just pitch the whole thing on Saturday when you are ready.

You can boil the corn sugar in 1 to 2 cups of water then add it to the boiling wort 10-minutes before the end of the boil. This way the corn sugar is fully dissolved when you add it to the wort. Pre-boiling the corn sugar makes it easier to add to your wort and the boil sterilizes the sugar.

The Black IPA (all-grain) is one of my favorite kits from Northern Brewer. I definitely plan on making this one again. I'd suggest letting this beer age for at least a month after bottling/kegging since the flavors mellowed a lot and the caramel/toffee notes were really popping at about 2-months old.

Good luck!

 
Reply With Quote
Old 05-13-2011, 09:45 PM   #7
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


There's no smack pack or liquid vial that has enough yeast for optimal pitching of a 5 gallon batch. You always need a starter to ramp up to optimal pitching.

I ignored starters for a long time, then joined a brew club. Everyone tasted acetylaldehyde (green apple/cidery off flavor) in my beers.

So I started making starters and paying a little more attention to my yeast health.

No more green apple.

I know guys that won't even make an IPA unless they have a cup of yeast slurry off a previous batch (like a pale ale) to use. A starter isn't even sufficient in their eyes...and they make some really good beer so I won't even debate it with them.
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Old 05-15-2011, 02:43 PM   #8
redshift
Recipes 
 
Apr 2011
St. Louis, MO
Posts: 26
Liked 1 Times on 1 Posts


Thanks to all for the advice and, well, helping me read what was printed on the sheet - if not so clearly! I made a 2L sized starter and let that work for a bit over 24 hours. I'll make it another day or two sooner next time. Note to self, swirling a working starter can be a very messy thing! That being said, the brew went smoothly and it sure didn't take very long until it was bubbling and foaming away. I switched to fermenting in a carboy with blow-off tubing this time which sure is a lot more interesting than staring at a bucket hoping it bubbles!

 
Reply With Quote
Old 05-20-2011, 07:04 PM   #9
Elky
Recipes 
 
Apr 2011
Boston, MA
Posts: 43
Liked 4 Times on 2 Posts


Nice man, I'm brewing this as soon as my St. Paul porter finishes in primary. I plan on racking the porter to secondary and then racking the cooled wort right onto the safale-05 cake. 5 gallon decanted starter baby!

 
Reply With Quote
Old 05-20-2011, 07:48 PM   #10
TomOliver
 
TomOliver's Avatar
Recipes 
 
Feb 2011
Waco, Texas
Posts: 1,350
Liked 3 Times on 3 Posts


I personally brewed this kit and did not use a starter. It turned out great and finished out at 1.014 after 5 weeks in Primary. Of course using a starter would only help, but in my experience it was not necessary.

Tom
__________________
Kegged - Scottish 70 Shilling
Kegged - Pale Burton SMASH
Kegged - Sorghum Pale Ale
Kegged - Hoppy Amber

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeast & Starter Questions: Octang Beginners Beer Brewing Forum 3 08-22-2009 07:47 PM
Yeast starter questions papamike Beginners Beer Brewing Forum 2 06-20-2009 03:05 AM
Yeast starter questions NorcalBrew Beginners Beer Brewing Forum 8 07-20-2008 05:05 AM
Yeast Starter Questions schmink311 Beginners Beer Brewing Forum 4 12-16-2007 06:06 PM
Yeast starter questions rbankert Beginners Beer Brewing Forum 5 12-11-2007 08:15 PM


Forum Jump