In-Line sight tubes just got easy - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > In-Line sight tubes just got easy

Reply
 
Thread Tools
Old 05-11-2011, 05:53 PM   #1
bbognerks
Recipes 
 
Sep 2010
Wichita, KS, Kansas
Posts: 339
Liked 16 Times on 16 Posts



Check this new item out from Bargain Fittings.

http://www.bargainfittings.com/index...product_id=169


__________________
Primary: Belgian Dark Strong Ale

Keg 1: English IPA
Keg 2: Dortmunder Export
Keg 3: Sweet Stout
Keg 4: Kölsch

 
Reply With Quote
Old 05-11-2011, 06:11 PM   #2
integrator
Recipes 
 
Sep 2010
Indy, IN
Posts: 160
Liked 3 Times on 3 Posts


This should only be used on the cold side of your process. Max temp is 140 degrees.


Keep that in mind.



 
Reply With Quote
Old 05-11-2011, 06:21 PM   #3
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
 
IrregularPulse's Avatar
Recipes 
 
Nov 2007
Posts: 50,274
Liked 3338 Times on 3204 Posts


What is the point of this? Just to watch the beer drain to the fermenter before seeing it drain to the fermenter? I'd understand if it were glass and could withstand boiling temps for recirc.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom

 
Reply With Quote
Old 05-11-2011, 06:34 PM   #4
h22lude
HBT_SUPPORTER.png
 
h22lude's Avatar
Recipes 
 
Dec 2010
lincoln, ri
Posts: 2,530
Liked 144 Times on 121 Posts


Maybe if you have all metal piping, you could put this in after the chiller to see the sort coin through. Or if you have an online oxygenator, you can see the bubbles.
__________________
Primary: Galaxy Dry Hopped Fort Point clone

Kegged: Saison

Bottled: S'mores Stout

 
Reply With Quote
Old 05-11-2011, 07:03 PM   #5
bbognerks
Recipes 
 
Sep 2010
Wichita, KS, Kansas
Posts: 339
Liked 16 Times on 16 Posts


Yes sorry, I had the intentions of using this for in-line oxygen. I should have made that clear.
__________________
Primary: Belgian Dark Strong Ale

Keg 1: English IPA
Keg 2: Dortmunder Export
Keg 3: Sweet Stout
Keg 4: Kölsch

 
Reply With Quote
Old 05-12-2011, 01:47 AM   #6
sanch
Recipes 
 
Jun 2009
Mesa town, AZ
Posts: 255
Liked 4 Times on 4 Posts


You can tread poly carbonate for higher temps it is supprisingly easy.


__________________
I may be a little scroungy , at least I'm not vain !!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Copper tubes in beer tower tcory77 Kegerators & Keezers 8 02-21-2014 02:28 AM
Dip tubes and whirlpooling??? akthor Brew Stands 23 01-05-2011 06:56 AM
beer tubes genommen Kegerators & Keezers 18 03-08-2010 11:49 PM
lauter tun copper tubes: notched or drilled? vmpolesov Kettles, Mash Tuns & Hot Liquor Tanks 11 01-22-2008 01:50 AM
Show me your tubes. Cheesefood Kettles, Mash Tuns & Hot Liquor Tanks 32 04-13-2007 07:09 PM


Forum Jump