Auber COOL setting help - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Electric Brewing > Auber COOL setting help
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 05-08-2011, 10:21 PM   #1
Twang
Recipes 
 
Jan 2009
Posts: 204
Liked 3 Times on 3 Posts



I have the auber 2352 PID cool setting set to 10, which should be heating and fahrenheit mode. But when I look at the sv value, it won't let me go past 100. What is the large number that is displayed when you press set once?



 
Reply With Quote
Old 05-10-2011, 08:38 PM   #2
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
 
Walker's Avatar
Recipes 
 
Sep 2005
Cary, NC
Posts: 10,982
Liked 99 Times on 88 Posts


Quote:
Originally Posted by Twang View Post
I have the auber 2352 PID cool setting set to 10, which should be heating and fahrenheit mode. But when I look at the sv value, it won't let me go past 100. What is the large number that is displayed when you press set once?
My guess is that you have the thing in manual mode, where SV is showing you the effective percentage off power that you are using based on rapid on/off cycling (and it maxes at 100).

I don't have that PID, but I think you press the [A/M] button to go back to automatic mode. A/M = Automatic/Manual.


__________________
Ground Fault Brewing Co.

 
Reply With Quote
Old 05-10-2011, 10:23 PM   #3
stlbeer
Senior Member
HBT_SUPPORTER.png
 
stlbeer's Avatar
Recipes 
 
Jan 2008
Fenton, MO
Posts: 960
Liked 37 Times on 36 Posts


Probably would be best to see an example:

http://auberins.com/images/Manual/Ma...sion%203.4.pdf

See the last page. Section 5.6. Figure 11.

Maybe you need a 2342 instead?

 
Reply With Quote
Old 05-11-2011, 02:00 AM   #4
Twang
Recipes 
 
Jan 2009
Posts: 204
Liked 3 Times on 3 Posts


http://auberins.com/images/Manual/Ma...sion%203.4.pdf

Is "Display 1" on figure 4.1, page 2 showing the temperature?

 
Reply With Quote
Old 05-11-2011, 05:15 AM   #5
stlbeer
Senior Member
HBT_SUPPORTER.png
 
stlbeer's Avatar
Recipes 
 
Jan 2008
Fenton, MO
Posts: 960
Liked 37 Times on 36 Posts


Quote:
Originally Posted by Twang View Post
http://auberins.com/images/Manual/Ma...sion%203.4.pdf

Is "Display 1" on figure 4.1, page 2 showing the temperature?
Yes, the top value is the process value or current temperature and the bottom value is the set value or desired temperature.

 
Reply With Quote
Old 05-12-2011, 11:43 PM   #6
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
 
Walker's Avatar
Recipes 
 
Sep 2005
Cary, NC
Posts: 10,982
Liked 99 Times on 88 Posts


Quote:
Originally Posted by stlbeer View Post
Yes, the top value is the process value or current temperature and the bottom value is the set value or desired temperature.
unless you have the thing in manual mode... in that case, SV shows you the percentage of "on" time.

Since he can't set SV to anything over 100, I am still betting the farm that he has it in manual mode.... 100% is the max SV.


__________________
Ground Fault Brewing Co.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Auber 2352 PIDs terrazza Electric Brewing 5 10-13-2011 10:17 PM
Help with Auber 2352 PID Navy_Brewer Electric Brewing 0 04-05-2011 07:38 PM
Auber 2362 dboblitt Electric Brewing 2 03-15-2011 03:09 AM
Ranco vs. Love vs. Auber PID beeguy Electric Brewing 8 01-24-2011 06:53 AM
Auber 2352 vs. 2362 paledragon Electric Brewing 0 12-19-2010 02:24 PM


Forum Jump