Wood Brew Stand Build - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Wood Brew Stand Build

Thread Tools
Old 05-02-2011, 04:00 PM   #1
Aug 2009
Richmond VA
Posts: 229
Liked 2 Times on 2 Posts

Been working on this on spare weekends and thought I would share. I took my inspiration from this site and modified it to what I needed (Sketchup is my friend).

Here is a shot of the finished frame mocked up with burners and such.

Spent this past weekend teaching myself to solder copper. Here is the gas manifold, just needs the fittings to connect everything and some real brackets to hold it to the frame.

I bent the flashing for this heat shield by hand, and it most definitely looks like hammered dog crap, that won't do. I have a sheet metal break on loan now so I should get that done a bit more professionally this week (I hope).

I had hoped to use the valves that came with the burners (the ones where you have to keep cranking a timer every 20 min.) as on off valves for automation, but they don't function quite the way I had hoped they would.

What kind of valves do people typically use for this? I've seen them on rigs, just don't know what they are.
Damn Yankee Brewing

|Bar Build|

Reply With Quote
Old 05-02-2011, 06:45 PM   #2
Dec 2010
Willamette Valley, Oregon
Posts: 34

Hey, I one of those burners also.
I drilled a hole thru the knob and wired it to the on position. The thermo couple still works and the push button to turn the gas on works too.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew Stand build (Mini Brew Stand) Espi Brew Stands 20 05-07-2011 01:06 AM
My Brew Stand Build drumike102 Brew Stands 13 03-25-2011 01:08 AM
Brew stand build! bcray Brew Stands 8 11-20-2010 03:14 PM
wood framed brew stand - creator? Datchew Brew Stands 2 10-14-2010 01:08 AM
Wood Single tier brew stand brewluver Brew Stands 13 07-29-2010 04:27 PM

Forum Jump