Steeping/mashing with RO-DI water using LME? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Steeping/mashing with RO-DI water using LME?

Reply
 
Thread Tools
Old 05-01-2011, 06:07 PM   #1
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts



Hello all!

I tried something yesterday that I want to get some feedback on... I've been going to the local market and getting 5 gallons of reverse osmosis de-ionized water for brewing, since I'm just doing extract+steeping grains at the moment. Obviously that water would not be conducive to mashing grains, being that it has no mineral content and such.

I understand that liquid malt extract is the result of properly mashed grains. When those grains are mashed, obviously the water used has the appropriate mineral content and pH conducive to mashing. As a result, the liquid malt extract contains those minerals to some extent.

What my crazy mind with bizarre logic led me to try was this: I added a small amount, probably 1 or 1.5 cups, of LME to my steeping water. I thought that by doing this, I might actually get some enzyme activity and some starch conversion in my steeping grains, kindof like a super-mini mash.

My brain is fried right now because I celebrated my birthday last night, but I wanted to get some thoughts and feedback on this subject. Thoughts? Questions? Anything would be appreciated. Cheers!

 
Reply With Quote
Old 05-01-2011, 06:27 PM   #2
Calder
Recipes 
 
Mar 2010
Ohio
Posts: 7,619
Liked 634 Times on 554 Posts


No enzymes in extract. It is completely mashed, and stabilized.

 
Reply With Quote
Old 05-02-2011, 01:35 AM   #3
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts


Right, I know that. I wasn't saying that I was using the extract for enzymes, only for minerals. I put a little LME in with my steeping grains (crystal 40, chocolate, etc), on the off chance that the mineral content of the LME would be conducive to mashing.

 
Reply With Quote
Old 05-02-2011, 02:03 AM   #4
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,763
Liked 8032 Times on 5611 Posts


Quote:
Originally Posted by Jakemo View Post
Right, I know that. I wasn't saying that I was using the extract for enzymes, only for minerals. I put a little LME in with my steeping grains (crystal 40, chocolate, etc), on the off chance that the mineral content of the LME would be conducive to mashing.
I don't see the point at all. There aren't any enzymes to convert, and with the grains (which have minerals in them), you're only making "tea" and extracting the flavor and color. All the extract would do is make them sticky.

Steeping grains don't need to be mashed- so you can steep them. If you want to mash them, you need some grains with diastatic power- like two-row. Extract won't mash them (no enzymes for conversion) and won't give them minerals (which are in the grain in small amounts anyway).

I often use RO water for mashing and/or steeping. It's fine.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 05-02-2011, 02:47 PM   #5
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts


Lol... again, I wasn't using the extract for enzymes.

But thanks, Yooper, I guess I didn't think about whether the grains I was steeping actually had any diastatic power, which is decidedly the more important question.

So you say you use RO for mashing/steeping... would RO-DI water be OK for a partial mash? Or would I need to start worrying about chemistry and pH at that point? I want to start doing partial mash batches, but I'm trying to cover my bases first.

 
Reply With Quote
Old 05-02-2011, 02:58 PM   #6
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,763
Liked 8032 Times on 5611 Posts


Quote:
Originally Posted by Jakemo View Post
Lol... again, I wasn't using the extract for enzymes.

But thanks, Yooper, I guess I didn't think about whether the grains I was steeping actually had any diastatic power, which is decidedly the more important question.

So you say you use RO for mashing/steeping... would RO-DI water be OK for a partial mash? Or would I need to start worrying about chemistry and pH at that point? I want to start doing partial mash batches, but I'm trying to cover my bases first.
Sure, you can use RO/DI for partial mashing. You can always worry about water chemistry if you want, but it usually is fine to start with RO water and add nothing. The grain has some minerals already, and you should have no problems converting. If you really really want to do "something", you could add 1/2 teaspoon of calcium chloride to 2.5 gallons of RO water and use that for mashing and sparging. That would bring up the calcium level of your mash without causing any harsh effects, as well as lower the pH of the mash a tad.

I've had a water test done on my tap water, and I find that my tap water is great, except for a high bicarb level. So for stouts, I use straight tap water but for everything else I use a mix of my own tap water and RO water. For a Bohemian pilsner, I use straight RO water (no salts at all). If you don't know your water chemistry, using straight RO water is a fine idea!
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 05-02-2011, 03:16 PM   #7
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts


Awesome. Very helpful info, thanks a ton!

 
Reply With Quote
Old 05-03-2011, 06:56 PM   #8
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts


On another, but related, note, would the fact that the steeping grains aren't actually mashing (even in an Old Rasputin clone with like 3lbs of grains) be what's causing my consistently low OG's?

I'm using Hopville's recipe calculator to make my recipes, and it always spits out a range and a specific number for an OG, and I always come within 10-15 points, and just attributed it to incomplete mixing of water and wort when I measure my OG (even after a fairly thorough shaking). FG always ends up exactly where it's supposed to be though.

 
Reply With Quote
Old 05-03-2011, 09:17 PM   #9
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,763
Liked 8032 Times on 5611 Posts


Quote:
Originally Posted by Jakemo View Post
On another, but related, note, would the fact that the steeping grains aren't actually mashing (even in an Old Rasputin clone with like 3lbs of grains) be what's causing my consistently low OG's?

I'm using Hopville's recipe calculator to make my recipes, and it always spits out a range and a specific number for an OG, and I always come within 10-15 points, and just attributed it to incomplete mixing of water and wort when I measure my OG (even after a fairly thorough shaking). FG always ends up exactly where it's supposed to be though.
Maybe Hopville is wrong? Just a thought! If you want to post a typical recipe, I'll see what Beersmith says.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 05-03-2011, 09:30 PM   #10
Jakemo
Recipes 
 
Feb 2011
Denver, CO
Posts: 288
Liked 10 Times on 7 Posts


Well... most recently, a Bert Grant's Perfect Porter clone. I've messed around a little bit with BeerSmith, but have had a very hard time making sure all of the grains are in there... I should probably put a little more effort into it, though. It's quite probable that Hopville just isn't as flexible as BeerSmith.

5# Light LME
12oz Chocolate Malt
10oz Crystal 40L
1.5oz Briess Cherrywood Smoked Malt
1oz Carafa III

Calc. OG 1.045 (1.040-1.047), measured 1.035
Calc. FG 1.012 (1.010-1.013)

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mashing vs steeping Beergoblin Beginners Beer Brewing Forum 7 04-28-2011 12:34 AM
Steeping vs Mashing woody189 Beginners Beer Brewing Forum 3 12-09-2010 10:01 PM
Mashing and Steeping ??? wayloncash Beginners Beer Brewing Forum 8 09-20-2010 12:16 AM
Mashing vs. Steeping Frenchy Beginners Beer Brewing Forum 7 08-01-2010 02:39 AM
Difference between mashing and steeping jldc Beginners Beer Brewing Forum 1 12-14-2008 05:40 PM


Forum Jump