Which Barigain Fittings bulkhead kit for Island Breeze 60qt Igloo Cooler? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Which Barigain Fittings bulkhead kit for Island Breeze 60qt Igloo Cooler?

Reply
 
Thread Tools
Old 04-30-2011, 07:25 PM   #1
dgoldb1
Recipes 
 
Jan 2007
Baltimore, MD
Posts: 380
Liked 2 Times on 2 Posts



I'm making a mash tun out of a 60qt Island Breeze Igloo cooler (rectangular). Does anyone know for sure which of their bulkhead kits is the correct size for these coolers?



http://www.bargainfittings.com/index...&product_id=85



 
Reply With Quote
Old 05-03-2011, 06:33 PM   #2
jdgearha
Recipes 
 
Apr 2011
HOWELL, MI
Posts: 4

I took a look at a similar cooler (island breeeze 28 qt) at walmart and it looked about an inch thick or less where I would install the drain. Typically, coolers with drains are a bit thinner at the drain so I *think* the 1 1/2" nipple would be enough. The worst case is, you get the wrong size nipple and have to drop a few bucks for a longer one at a big box store. Regardless of nipple length, note you may have to bore the drain hole a little for the fittings to fit.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference Between Igloo 60qt and 70qt Coolers for a Lager? coryforsenate Equipment/Sanitation 0 04-11-2011 05:39 PM
Which Barigain Fittings bulkhead kit for Rubbermaid cooler? Frank-Likes-Beer Equipment/Sanitation 4 02-27-2011 02:53 AM
60Qt Igloo Cube Cooler ChefOdin Equipment/Sanitation 0 11-27-2009 04:19 AM
Converting 60Qt Igloo Cube Cooler to Mash Tun BeerGrills Equipment/Sanitation 5 09-23-2009 10:20 PM
Igloo 60qt Ice Cube lid removal bwitt Equipment/Sanitation 2 05-24-2008 12:52 PM


Forum Jump