Regulator Dial Rattling... - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Regulator Dial Rattling...

Thread Tools
Old 04-23-2011, 01:04 AM   #1
Feb 2011
Lebanon, PA
Posts: 123

So I've had quite a few issues with my Keg Connection setup so far. I finally finished my Keezer and mounted my regulators to the collar. I hooked up the gas, pressure on the dials rises fine, hooked up the gas line to a keg, opened the valve on the regulator to pressurize a soda keg, and right around 28-30 PSI, the needle starts rattling like wild back and forth. The odd darn thing is that if I close off the valve on the regulator and then reopen it, the rattling stops on the needle and dosn't come back... It's so odd! I'm assuming this isn't normal???

Reply With Quote
Old 04-23-2011, 02:05 PM   #2
Registered User
Nov 2010
Olympia, WA
Posts: 3,416
Liked 15 Times on 13 Posts

Sounds like a loose diaphram. If you are comfortable with working on a regulator (which means you can purchase a new one if you break the old one), I would suggest a rebuild. If you remove the pressure adjustment assembly, you will find a little usually brass screw in the middle of the diaphram. Tighten that down and you should be good to go after reassembling the regulator of course.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Soda Regulator vs. Beer Regulator shildebr Bottling/Kegging 1 03-27-2011 02:26 AM
2 keg setup - dual body regulator vs. regulator with dual output manifold heyjaffy Bottling/Kegging 11 02-18-2011 10:17 PM
Do I need a regulator dial for each keg? Dogphish Bottling/Kegging 1 01-10-2011 01:44 AM
is co2 regulator the same as a beergas regulator? bkov Bottling/Kegging 4 04-15-2009 03:32 AM
What should my regulator bottle dial read? jaja Bottling/Kegging 5 02-16-2009 11:11 PM

Forum Jump