Keezer size advice needed - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Keezer size advice needed
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Thread Tools
Old 04-22-2011, 05:11 PM   #1
Apr 2010
Vail, Arizona
Posts: 22

I am looking to do a keezer project myself and there is a 9 cu ft kenmore on craigslist in town. I'm sure bigger is better but any thoughts on whether this would be big enough for 4-6 cornies and an occasional carboy?

Father. Brewer. Baconist.
Creed Brewing

Reply With Quote
Old 04-22-2011, 05:38 PM   #2
h22lude's Avatar
Dec 2010
lincoln, ri
Posts: 2,377
Liked 128 Times on 109 Posts

It all depends on the interior dimension but I would think a 9 cu ft would fit at least 4 or 5. I have a 7 cu ft and without a collar it can fit 3 and a 2.5 gallon. With a collar I can fit 4.

Reply With Quote
Old 04-22-2011, 06:23 PM   #3
hillhousesawdustco's Avatar
Jan 2011
up near babb, mt
Posts: 647
Liked 35 Times on 34 Posts

9cu ft should be plenty for 4-6, especially with a collar. There is a thread on here somewhere that has sizing diagrams for just about every freezer model ever, so if you look around you can probably find pretty close to your model. My 7cf fits 5 and the co2 with a collar.

Reply With Quote
Old 04-22-2011, 06:41 PM   #4
Whut's Avatar
Mar 2009
Peoria, AZ
Posts: 9,060
Liked 1778 Times on 1646 Posts

Here's the thread (sticky) hillhousesawdustco was talking about.

I have two 8.9cf Kenmore freezers and if I had a collar I could fit six. But I don't so they each hold four.
May Whut see him safely through the Pearly Gates half an hour before Crash knows he's dead. - hunter_la5

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Ideas Needed Mischief_Brewing Kegerators & Keezers 0 11-30-2010 04:20 PM
Question about keezer size thrstyunderwater Kegerators & Keezers 2 09-13-2010 12:58 PM
Is a keezer collar needed? whitee Kegerators & Keezers 9 04-13-2010 03:19 AM
Setting the Tile in my Keezer, advice needed russekc Kegerators & Keezers 11 04-11-2010 05:51 PM
A little help needed for keezer parts RBChallenger Kegerators & Keezers 7 03-15-2009 05:10 PM

Forum Jump