Carbonating Root Beer Without A Keg - Home Brew Forums

Register Now!
Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Soda Making > Carbonating Root Beer Without A Keg

Reply
 
Thread Tools
Old 04-17-2011, 11:40 PM   #1
Duffman53
Recipes 
 
Feb 2011
cincinnati, ohio
Posts: 41
Liked 1 Times on 1 Posts



Howdy! I was thinking about making a batch of root beer but every recipe and thread has implied that it needs to be kegged to help the carbonation.

I only bottle my beers and don't have a kegorator. Is there anything I can do to get a batch of root beer to carbonate? Couldn't I just add priming sugar when I bottle just like with a batch of beer and wait a couple of weeks for it to carbonate?

Any advice and suggestions would be greatly appreciated!

 
Reply With Quote
Old 04-17-2011, 11:56 PM   #2
cvstrat
Recipes 
 
Apr 2009
Richmond, VA
Posts: 691
Liked 7 Times on 6 Posts


http://www.wikihow.com/Make-Root-Beer


Looks like you could just let it naturally carb.

 
Reply With Quote
Old 04-18-2011, 05:20 PM   #3
Hazarmaveth
Recipes 
 
Apr 2011
Lancaster, PA
Posts: 15
Liked 1 Times on 1 Posts


The trick is that soda is not fermented dry like beer is. There is generally more fermentable sugar than you need for carbonation, so it will keep fermenting and raising the pressure until you stop it. If you don't stop it soon enough, it over-carbonates and you get bottle bombs. You generally stop (or at least drastically slow down) the fermentation by putting the bottles in the fridge when they feel pressurized enough. You are using plastic bottles, right? They should end up feeling about as hard as a plastic bottle of commercial soda, at which point you chill them and keep them cold. This is usually a matter of days, not weeks.

I make my sodas in one-gallon batches. The recipe basically goes like this:

2 cups brown sugar
3 Tbsp malto dextrine (for mouthfeel, not really a necessity)
4 tsp or so root beer extract from the grocery store
1/2 tsp vanilla extract
1/2 tsp anise extract
1/4 tsp champagne yeast
And the rest is water.

Mix the sugar, malto dextrine, extracts, and most of the water until everything is dissolved. You may want to heat the water to get the malto dextrine to dissolve. Rehydrate the yeast in some warm water. When everything is at a good temperature, add the yeast-water and aerate the mixture. Transfer to plastic bottles, cap them, and let them sit somewhere to ferment. Check them once a day, and when they are hard like normal soda bottles, stick them in the fridge. If you forget about them while they are fermenting, they will explode.

 
Reply With Quote
Old 04-19-2011, 02:23 AM   #4
Duffman53
Recipes 
 
Feb 2011
cincinnati, ohio
Posts: 41
Liked 1 Times on 1 Posts


Thanks for your input. I was hoping to use glass bottles but that doesn't sound like a safe idea anymore.

I was hoping to use Charlie Papazian's recipe for MacJack root beer in the homebrewer's companion. He mentions to not use any yeast and I was hoping to make a non-extract root beer.

So it looks like my two options are stick to extracts and recipes that use yeast in PET bottles or buy kegging equipment.

Thanks again for your input.
D

 
Reply With Quote
Old 04-19-2011, 07:15 PM   #5
duganderson
Recipes 
 
Apr 2010
Minnesota
Posts: 124
Liked 3 Times on 3 Posts


If you're careful and use a plastic test bottle, I have made a bunch of batches in glass 12 oz with no problems. I just like glass better.

 
Reply With Quote
Old 04-19-2011, 11:17 PM   #6
Hazarmaveth
Recipes 
 
Apr 2011
Lancaster, PA
Posts: 15
Liked 1 Times on 1 Posts


Quote:
Originally Posted by duganderson View Post
If you're careful and use a plastic test bottle, I have made a bunch of batches in glass 12 oz with no problems. I just like glass better.
Have you successfully used beer bottles? I've used the 12oz glass Coke bottles, which are built like tanks. I wasn't sure if the thinner beer bottles could take the additional pressure of soda.

 
Reply With Quote
Old 04-20-2011, 06:25 AM   #7
oldmate
 
oldmate's Avatar
Recipes 
 
Jun 2010
Sydney, Australia
Posts: 888
Liked 19 Times on 17 Posts


I am by far no expert on soda-making, but couldn't you just pasteurise your bottles? There's a sticky in the cider forum on this site. It's simple and effective, I've never had a problem with my ciders.

 
Reply With Quote
Old 04-21-2011, 07:17 PM   #8
Hazarmaveth
Recipes 
 
Apr 2011
Lancaster, PA
Posts: 15
Liked 1 Times on 1 Posts


That would work fine, but it's not my point. You can stop the fermentation well enough by sticking the bottles in the refrigerator. The thing that makes me nervous is that sodas are carbonated to two or three times the pressure of beer. On the other hand, I do have some root beer bottles that weigh exactly the same as some of my beer bottles: 7.6 oz. So it would probably work, now that I really think about it.

 
Reply With Quote
Old 05-21-2011, 03:57 AM   #9
Erroneous
Recipes 
 
Jan 2011
Tallahassee, Florida
Posts: 605
Liked 31 Times on 26 Posts


I've been thinking about making soda and using Thinkgeek's U-Fizz kit to carb a 2-liter bottle. The kit just connects 2 2L bottles together and you add vinegar and baking soda to one side and swirl the other around for a few minutes until you have carbonated your drink. I think that instead of the baking soda and vinegar method use yeast and sugar in one bottle. It'd take longer, but one should be able to produce the same amount of CO2 over time without having to worry about refrigerating to kill off yeast like in the natural carbing situation.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using $10/Case IBC Root Beer Bottles for Bottling Beer? jbrookeiv Bottling/Kegging 10 11-10-2010 06:42 PM
Keggin' Root Beer RadicalEd Bottling/Kegging 32 09-14-2007 10:32 PM
root beer smell beerman6 Bottling/Kegging 8 05-20-2007 08:20 PM
Root Beer & My Keg System sonvolt Bottling/Kegging 1 04-10-2007 12:52 AM
Root beer bottles Red Wagon Bottling/Kegging 4 02-09-2007 06:07 PM


Forum Jump