Stand alone thermometer or thermometer/sightglass - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Stand alone thermometer or thermometer/sightglass

Reply
 
Thread Tools
Old 04-12-2011, 06:22 PM   #1
adivito
Recipes 
 
Feb 2010
Naperville
Posts: 187
Liked 1 Times on 1 Posts



Wanted to find out what others prefer or a reason to go one way or the other. I am setting up my electric keggles and deciding between a traditional thermometer mount above ball valve and separate sight-glass, or the combo sight-glass/ thermometer offset to the side closer to the bottom. My issue with my current keggle is I have the traditional thermometer above valve, and once it gets to lower levels the thermometer is pretty much useless its giving my air temperature.

 
Reply With Quote
Old 04-12-2011, 06:27 PM   #2
Hebby
Recipes 
 
Feb 2011
Torrance, CA
Posts: 32
Liked 2 Times on 2 Posts


Go with a sight glass in the boil kettle and HLT. I just put them in mine and it's much better when figuring out volume for mashing and sparging. I got them from www.brewhardware.com

 
Reply With Quote
Old 04-12-2011, 06:28 PM   #3
BendBrewer
 
BendBrewer's Avatar
Recipes 
 
Jan 2010
Bend, Oregon
Posts: 3,134
Liked 78 Times on 60 Posts


I enjoy the flexibility to put the therm where I want it.

Have not heard the benefit of the combo unit except one less hole to drill.
__________________
CarPort Brewery
JCMAC Farms Garden

 
Reply With Quote
Old 04-12-2011, 06:31 PM   #4
adivito
Recipes 
 
Feb 2010
Naperville
Posts: 187
Liked 1 Times on 1 Posts


Either way I am going to have both, just wondered anybodys experience with the combo for or against. Thanks

 
Reply With Quote
Old 04-12-2011, 10:48 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,339
Liked 1767 Times on 1124 Posts


Separate keeps the thermo a bit tighter to the vessel but it's rather minimal. There's less of a difference especially with a keg because even in the combo unit, the bottom skirt of the keg keeps the thermometer face off the bottom.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 04-13-2011, 06:39 AM   #6
JuanMoore
 
JuanMoore's Avatar
Recipes 
 
Oct 2009
The Old Pueblo
Posts: 22,388
Liked 3742 Times on 3552 Posts


I use a combo thermo/sight glass in my HLT, thermo only in my MLT, and sightglass only in my BK. The sightglasses are both as low as possible to maximize usability, and I've had no issues with the thermo in the combo one being so low. The thermo in my MLT is a little less than 1/3 of the way up, so that it is somewhat centered in the mash but still low enough to be useful for 5 gal batches. I also have a thermo in the output of the HEX so that I can compare incoming temps with the center of the mash. It works well for me and my system/process (ghetto HERMS), but everyones is different. IMO it's really about personal preference and how you will be using your system.

Edit-
I use the HEX as a chiller also, and using the thermo in the HEX enabled me to avoid the need for a thermo in my BK.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thermometer in keggle 57plymouth Kettles, Mash Tuns & Hot Liquor Tanks 2 06-15-2010 07:54 PM
insulation for thermometer in brew kettle? thermometer face fogging/gets too hot! chainsawbrewing Kettles, Mash Tuns & Hot Liquor Tanks 3 02-22-2010 03:12 PM
inline thermometer help Julohan Brew Stands 0 01-13-2010 08:30 PM
looking for a thermometer. jonp9576 Kettles, Mash Tuns & Hot Liquor Tanks 12 05-09-2009 05:33 PM
My new sightglass/thermometer contraption. TerapinChef Kettles, Mash Tuns & Hot Liquor Tanks 9 03-29-2009 02:29 PM


Forum Jump