FG is lower than expected - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > FG is lower than expected

Reply
 
Thread Tools
Old 04-09-2011, 05:52 PM   #1
cieje
Recipes 
 
Oct 2010
Atlanta, Georgia
Posts: 29


I recently brewed my 3rd batch ever. I bought an Austin Homebrew extract kit for their 20th. It's the English Pale Ale.

The brew went perfect as far as I could tell, trying to fully sanitize everything etc. The OG was what the instructions said it should be, 1.051

Since I live in FL, and the room I was putting my ferming brew in swings temp a little, I put the ferm tub into a larger tub of regular tap water + some starsan (keep out any infection) filled about 1/2 - 2/3 of the way up on the side. There's no shirt or anything on it; I didn't make a swamp cooler. The water temp seemed to hold steady about 66-71 deg F at various times of the day. Ambient temp in the room can be anywhere from 70 to 88 over the last 2 weeks. The instructions said about 68deg.

For the first few days it bubbled the airlock as expected. I didn't smell any foul odors or anything unexpected. It stopped after a week or so, and I figured it was almost done with fermentation.

Today will be 2 weeks since ferm. I took a test sample for the first time. The gravity is 1.011... the instructions say it should be 1.014. Also, I tasted the sample; I don't think it tastes bad, but I was expected a lot more hop flavoring seeing as the recipe used 3 different bags of hops during the boil and it's an EPA. I'm worried the temp has been too low because I kept the tub in water; maybe the yeast went dormant a little.

tl;dr: OG 1.051 FG 1.011 (should be 1.014) - is an EPA but sample doesn't taste hoppy

Thoughts?

-cj

 
Reply With Quote
Old 04-09-2011, 05:55 PM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,406
Liked 7836 Times on 5490 Posts


1.011 is a fine FG. A target FG is at best a guestimate anyway. Ingredients, yeast strain, etc, all play a part. The projected FG at 1.014 is only a difference of .003! That's really nothing.

As far as the flavor, temperature plays a HUGE role. Do you know the temperature of the actual fermenting beer? I have a stick-on thermometer that I use so I can see at a glance what the beer temperature is during fermentation. I usually fill my water baths up to near the level of the beer to help keep the temperature from fluctuating, and then I can add a frozen water bottle to it if it gets too high.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 04-09-2011, 06:00 PM   #3
Shaneoco1981
HBT_LIFETIMESUPPORTER.png
 
Shaneoco1981's Avatar
Recipes 
 
Apr 2011
Rochester, MI
Posts: 581
Liked 12 Times on 12 Posts


Well, if your FG is lower then expected, the yeast didn't stall. I can guarantee that. I am not sure how dark you kept the room where it ferments, but it needs to be shielded from light. Without getting into a lot of technical crap, light hurts hops. The hops flavor is destroyed by light. That's why green bottles will make a beer skunky (over time). Always shield carboys from light somehow. I either use an old shirt, or I wrap a towel around it. I am not saying that's what happened, but you might want to consider shielding carboys from light.

 
Reply With Quote
Old 04-09-2011, 06:07 PM   #4
cieje
Recipes 
 
Oct 2010
Atlanta, Georgia
Posts: 29

Quote:
Originally Posted by Yooper View Post
1.011 is a fine FG. A target FG is at best a guestimate anyway. Ingredients, yeast strain, etc, all play a part. The projected FG at 1.014 is only a difference of .003! That's really nothing.

As far as the flavor, temperature plays a HUGE role. Do you know the temperature of the actual fermenting beer? I have a stick-on thermometer that I use so I can see at a glance what the beer temperature is during fermentation. I usually fill my water baths up to near the level of the beer to help keep the temperature from fluctuating, and then I can add a frozen water bottle to it if it gets too high.
I had a floating glass thermometer in the tub surround the ferm bucket. I assumed the outside liquid and the inside liquid would be with 1-2 deg of eachother as they would seek equilibrium.

it currently reads about 69deg F. It's probably about 73-76F ambient temp in the room now

NOTE: don't leave a glass thermometer sitting in star-san water for an extended period of time... it ate the tip of the glass off.

 
Reply With Quote
Old 04-10-2011, 02:02 AM   #5
cieje
Recipes 
 
Oct 2010
Atlanta, Georgia
Posts: 29

so if I don't think it's hoppy enough at this point ... Should I try dry hopping?

 
Reply With Quote
Old 04-10-2011, 02:30 AM   #6
ThePearsonFam
Recipes 
 
Feb 2009
Scarborough, Maine
Posts: 884
Liked 14 Times on 11 Posts


Dry hopping won't add bitterness but it'll give an impression of hopiness through a strong aroma.

The other thing to consider is that the flavor will change when you keg or bottle. It'll carbonate up and change the feel. That may influence your perception of the bitterness.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
OG lower than expected PassionBeer Beginners Beer Brewing Forum 10 10-13-2010 01:34 AM
Hydrometer reading way lower han expected. Ideas? brewd00d Beginners Beer Brewing Forum 12 09-30-2010 11:03 PM
how to fix a lower than expected OG Chris1272 Beginners Beer Brewing Forum 7 09-07-2010 10:24 PM
lower than expected SG scottie Beginners Beer Brewing Forum 3 02-27-2010 04:00 AM
a lower than expected gravity reading - cause for worry? snailsongs Beginners Beer Brewing Forum 2 03-13-2009 07:53 PM


Forum Jump