Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > how to attach propane hose to black pipe
Reply
 
Thread Tools
Old 04-08-2011, 07:41 PM   #1
ndoe22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Roseville, CA
Posts: 135
Liked 1 Times on 1 Posts
Likes Given: 1

Default how to attach propane hose to black pipe

I have a 10psi regulator and hose that I want to connect to black pipe. On the end of the hose is an orifice to burner. Should I cut the old orifice off and attach the hose to the pipe with a barbed fitting and hose clamp?


ndoe22 is offline
 
Reply With Quote
Old 04-08-2011, 08:14 PM   #2
slakwhere
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2009
Location: Salt Lake City, Utah
Posts: 762
Liked 20 Times on 19 Posts
Likes Given: 9

Default

go to a local propane supplier (not just uhaul) and they should be able to make you anything you need. i got a regulator out to 1/4" pipe thread that i stepped up to 1/2" black pipe. going back to get some more hoses made to replace those yellow flexy things from home depot with prettier/flexier hoses as well.


slakwhere is offline
 
Reply With Quote
Old 04-08-2011, 08:18 PM   #3
BendBrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Bend, Oregon
Posts: 3,169
Liked 76 Times on 58 Posts
Likes Given: 23

Default

Is that orifice 3/8" flared? If so, you need a 3/8" flared male to 1/2" mpt fitting assuming you are using 1/2" pipe.
__________________
CarPort Brewery
JCMAC Farms Garden
BendBrewer is offline
 
Reply With Quote
Old 04-08-2011, 08:20 PM   #4
BendBrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Bend, Oregon
Posts: 3,169
Liked 76 Times on 58 Posts
Likes Given: 23

Default

Hard to see but since I grabbed the url.....

__________________
CarPort Brewery
JCMAC Farms Garden
BendBrewer is offline
 
Reply With Quote
Old 04-10-2011, 05:51 PM   #5
ndoe22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Roseville, CA
Posts: 135
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Solution found. From the black pipe I have a 1/2 to 1/4 reducer. From the propane hose orfice I got a 1/8 to 1/4 bushing that ataches to the black pie. Thank you all for the help. The single tier is almost ready.


ndoe22 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a Brew Rig - Black Pipe? rono73 Brew Stands 20 03-18-2011 06:20 PM
Black Pipe Or Galvanized Pipe For Brutus? jcav Brew Stands 9 08-31-2010 01:09 AM
Brass propane orifice to hard pipe connection? HomeBrewFoSho Brew Stands 23 04-08-2010 10:21 PM
what fitting to attach burner to 1/2" black pipe? robumba Brew Stands 8 10-16-2009 11:49 PM
Pipe thread on garden hose? kerklein2 Chillers and Stir Plates 11 03-12-2009 11:52 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS