Help with Auber 2352 PID - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Help with Auber 2352 PID

Thread Tools
Old 04-05-2011, 07:38 PM   #1
Sep 2006
Posts: 18
Liked 2 Times on 2 Posts

Is there a way to make one of the alarms normally closed on the Auber 2352 PID. I want to be able to set an alarm when the Strike water gets to temp but unless I go into settings for the Process High alarm each time I don't see how I can do it. I would like to set a Process deviation low alarm to always make the alarm sound when 1 degree below process. On a normally closed relay that would open the relay when active and close when it is no longer active, giving me an alarm 1 degree below my process set point.

Anyone have any ideas?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Auber 2352 PIDs terrazza Electric Brewing 5 10-13-2011 10:17 PM
Auber 2362 dboblitt Electric Brewing 2 03-15-2011 03:09 AM
Auber SYL-2352 PID issue: Temp way off JayInJersey Electric Brewing 10 02-16-2011 12:44 AM
Ranco vs. Love vs. Auber PID beeguy Electric Brewing 8 01-24-2011 06:53 AM
Auber 2352 vs. 2362 paledragon Electric Brewing 0 12-19-2010 02:24 PM

Forum Jump